[USB-043] USB Isolator Board

RoHS10 Isolated windows and mac SurgeProtection Board
NonChemi-Con 

Improved reliability is protected from the noise
by an isolated USB connection.

Permalink of this page:

Overview

USB-043 is a USB 2.0 Full Speed(12Mbps) and Low Speed(1.5Mbps) compliant isorator which isolates between a USB host and a USB peripheral device with 2500VDC. USB-043 can be used to built-in to the device for the board type. With USB-043, it can be expected to eliminate ground loops that can cause measurement errors and equipment from surges, common-mode voltage, static discharge, magnetic fields, and radio frequency interference.There is no need to install any drivers. It works with every operating system such as Windows, Linux, Mac OS X.

Features

  • USB host connector which is standard Type B female and have to be connected to a PC or other USB host device
  • USB target connector which is standard Type A female and have to be connected to a USB peripheral device
  • Uses standard high-retention USB Type A/B cable connection
  • USB 2.0 Full Speed (12Mbps) and Low Speed (1.5Mbps) Speed compliant
  • OS-Independent (No drivers required)
  • USB-043 is powered through a USB port (Bus-powered)
    DC-DC converter supply isolated voltage to a USB peripheral device from a USB host if no external power supply is present
  • 2500VDC bus isolation
  • ESD and surge protection
  • Includes a USB cable (1.8m)
  • Non-use of 10 Restricted substances of RoHS directive
  • MADE IN JAPAN

Specification

Item Description Remarks
Model USB-043  
Input Power 5VDC
Supplied through a USB port(Bus-powered)
No external power supply required
Current Consumption Less than 100 mA + current of the target device Target device : 400mA max.
(Lower than the supply capacity of the host side)
HOST Interface USB 2.0 Compliant
(Supports Full and Low Speed)
USB 1.1 compatible
Hi Speed is not supported.
ESD protection ESD11kV
Isolation Method Bus isolation  
Isolation Protection 2500VDC Designed value
Support OS OS-Independent (No drivers required)  
LED POW :Power LED  
USB Connector(Host) Standard Type B Female High-retention connector
USB Connector(Target) Standard Type A Female High-retention connector
Operating Ambient Temperature -20 to 60℃ (-4 to 140 [°F]) No condensation permitted
Operating Ambient Humidity 30 to 85%RH No condensation permitted
Storage Ambient Temperature -20 to 60℃ (-4 to 140 [°F]) No condensation permitted
Storage Ambient Humidity 30 to 85%RH No condensation permitted
Noise Tolerance Not defined  
Transmission and other Standard Not defined  
Dimensions 63 x 40[mm]
(2.480" x 1.575")
Without projections
Weight Approx. 20 [g] Only main body

Package Contents

  • USB-043
  • USB A-B cable 1.8m

Price and Optional Accessories

Description MODEL Image List Price (JPY) Stock Status
USB Isolator Board USB-043 USB-043
Attachment A for panel mount ACC-024 ACC-024
ページトップへ
[]