[USB-029 Rev2] USB Isolator HuMANDATA LTD.

Print

[USB-029] USB Isolator Rev2

RoHS10 Isolated windows and mac SurgeProtection

Improved reliability is protected from the noise
by an isolated USB connection

Permalink of this page:

Overview

USB-029 is a USB 2.0 Full Speed (12Mbps) and Low Speed (1.5Mbps) compliant isolator which isolates between a USB host and a USB peripheral device with 3500VDC. With USB-029, it can be expected to eliminate ground loops that can cause measurement errors and equipment from surges, common-mode voltage, static discharge, magnetic fields, and radio frequency interference.There is no need to install any drivers. It works with every operating system such as Windows, Linux, Mac OS X.

USB-029

Second and subsequent images are CG models

Features

  • USB host connector which is standard Type B female and have to be connected to a PC or other USB host device
  • USB target connector which is standard Type A female and have to be connected to a USB peripheral device
  • USB 2.0 Full Speed (12Mbps) and Low Speed (1.5Mbps) compliant
  • OS-Independent (No drivers required)
  • USB-029 is powered through a USB port (Bus-powered) or an AC adapter (Self-powered)
    DC-DC converter supply isolated voltage to a USB peripheral device from a USB host if no external power supply is present
  • 3500VDC bus isolation
  • ESD and surge protection
  • Housing material: Plastic
  • DIN rail, magnet, and screw mountable(Attachment is required)
  • Includes a USB cable(1.8m)
  • Includes an AC adapter
  • Non-use of 10 Restricted substances of RoHS directive

Specification

Item Description Remarks
Model USB-029  
Input Power 5VDC
Supplied through a USB port (Bus-powered) or AC adapter (Self-powered)
Recommend the use of an AC adapter for stably supply
An AC adapter supply to the host side.
Current Consumption Less than 100 mA + current of the target device Target device : 400mA max.
(Lower than the supply capacity of the host side)
HOST Interface USB 2.0 Compliant
(Supports Full and Low Speed)
USB 1.1 compatible
Hi Speed is not supported
ESD protection ESD11kV
Isolation Method Bus isolation  
Isolation Protection 3500VDC Designed value
Support OS OS-Independent (No drivers required)  
LED HT POW: Host Power
TG POW: Target Power
DCIN: Power LED
 
Operating Ambient Temperature -10 to 60℃ No condensation permitted
Operating Ambient Humidity 30 to 85%RH No condensation permitted
Storage Ambient Temperature -10 to 60℃ No condensation permitted
Storage Ambient Humidity 30 to 85%RH No condensation permitted
Noise tolerance Not defined  
Transmission and other standard Not defined  
Weight Approx. 80 [g] Only main body
Dimensions 67 x 67 x 28 [mm]
(2.638" x 2.638" x 1.102")
Without projections

Package Contents

  • USB-029
  • USB A-B cable 1.8m
  • AC adapter

Price and Optional Accessories

Description MODEL Image List Price (JPY) Stock Status
USB Isolator Rev2 USB-029 USB-029
USB series Attachment
with clamping screw
PEN-003 PEN-003
USB series Attachment
for 35mm DIN rail
PEN-003-DIN PEN-003-DIN
USB series Attachment
with neodymium magnet
PEN-003-MG PEN-003-MG
ページトップへ
[]

 

© HuMANDATA LTD. - Altera & Xilinx FPGA Boards manufacturer in Japan - 2016
HuMANDATA