Multiplexer

[USB-208] USB Multiplexer 4:1 - USB Switching Device HuMANDATA LTD.

[USB-208] USB Analog Multiplexer 4:1 Under development

RoHS104chRS232RS485RS422DB9SurgeProtectionwindows and macCDC UART
NonChemi-ConFlame-retardant-ABS.gif

Analog multiplexer with 4 switchable channels
Switch RS-232C, RS-422/485 signals by USB, external input or manual switch

Overview

USB-208 is a multiplexer that can switch one common port to one of four channels. 
RS-232C, RS-422/485, and other analog signals can be switched by the following three ways.

  • Sending simple commands from a PC via USB
  • External input, no-voltage contact input or DC input can be selected
  • Switching manual switch on the side panel

It supports analog signal voltage range of ±25V and data rate up to 20Mbps.
The system can also be used to save labor in the inspection process. 
It allows four units in a single setting during automatic equipment inspection.

USB-208

Features

  • 4 channel analog signals, RS-232C, RS-422/485 and others, can be switched automatically
  • Supports analog signal up to ±25V
  • Supports max. 20Mbps
  • Switch by sending simple commands from a PC via USB
    You can use our free Application or general purpose terminal software such as TeraTerm.
  • Switch by External input
    no-voltage dry contact input or 5 to 24V DC input
  • Manual switching by using the switch on the main body of the unit
  • Controllable from embedded Linux devices
    It operates as a device of the standard CDC-ACM class.
    For Linux distributions with embedded CDC-ACM device drivers, you can use them without installing the drivers.
    We do not support the use of Linux itself.
  • Uses high-retention industrial grade USB connector
  • USB line has ESD protection
  • Includes a USB A-B cable (1.8m)
  • Includes an AC adapter
  • Non-use of 10 Restricted substances of RoHS directive
  • MADE IN JAPAN

Pinouts and Wiring between COMMON and each channel

CONNECTION EXAMPLE

[Switching RS-232C equipment via USB]

[Switching RS-485/422 signal by external switch box]

Specification

Item Description Remarks
Model USB-208  
Input Power 5VDC, less than 150mA
Supplied through a USB port (Bus-powered) or AC adapter
Number of Switching Port 4
Analog Signal Range ±25V
Analog Signal Data Rate max. 20Mbps
LSI MAX14778 analog multiplexer ADI
Common Port D-SUB 9pin Male (#4-40 UNC)  M2.6 screws are also included in the package
Switching Port D-SUB 9pin Male x 4 (#4-40 UNC) 
Control Port USB2.0 B connector
Virtual COM Port (Support Full Speed)		 ESD protection ESD11kV
Support OS for controller side Windows 11/10/8.1/8/7 CDC driver
OS of common/switching ports are not limited
External Input Connector D-SUB 9pin Male (#4-40 UNC) M2.6 screws are also included in the package
External Input Specification No-Voltage Dry Contact Input Switch setting: VCC side
Photocoupler Isolated Input
Input: DC5 to 24V
Input impedance: 2.8KΩ
OFF to ON Voltage: more than 4.3V
ON to OFF Voltage: up to 3.6V
Minimum OFF-state Current: 0.9mA		 Switch setting: COM side
LED Power LED
Channel LED x 4
Operating Ambient Temperature -20 to 60[°C] (-4 to 140 [°F])  No condensation permitted
Operating Ambient Humidity 10 to 85%RH
Storage Ambient Temperature -20 to 60[°C] (-4 to 140 [°F]) 
Storage Ambient Humidity 10 to 85%RH
Dimensions 165 x 80.5 x 39 [mm]
(6.496" x 3.169" x 1.535")		 Without projections
Weight Approx. 350 [g] Only main body

* Power saving function (suspend, standby, sleep and others) is not supported.

Package Contents

  • USB-208
  • USB A-B cable 1.8m
  • AC adapter
  • Screw Lock M2.6 D-sub Connectors (#4-40 UNC Connectors are mounted by default)

Documentation

Price and Optional Accessories

Description MODEL Image List Price (JPY) Stock Status
USB Analog Multiplexer 4:1
 USB-208 USB-208
Attachment for vertical direction
 ACC-027 ACC-027
Attachment for horizontal direction
 ACC-028 ACC-028
Attachment for DIN rail type B
 ACC-031 ACC-031
Neodymium magnet set
 ACC-036 ACC-036
D-sub 9pin to 6P adapter with FG terminal
 ACC-045 ACC-036

Accessories List

ページトップへ
[ ]

[USB-404] USB Multiplexer 8:1 - USB Switching Device HuMANDATA LTD.

[USB-404] USB Analog Multiplexer 8:1 Under development

RoHS108chRS232RS485RS422DB9SurgeProtectionwindows and macCDC UART
NonChemi-ConFlame-retardant-ABS.gif

Analog multiplexer with 8 switchable channels
Switch RS-232C, RS-422/485 signals by USB, external input or manual switch

Overview

USB-404 is a multiplexer that can switch one common port to one of eight channels. 
RS-232C, RS-422/485, and other analog signals can be switched by the following three ways.

  • Sending simple commands from a PC via USB
  • External input, no-voltage contact input or DC input can be selected
  • Switching manual switch on the side panel

It supports analog signal voltage range of ±25V and data rate up to 20Mbps.
The system can also be used to save labor in the inspection process. 
It allows eight units in a single setting during automatic equipment inspection.

USB-404

Features

  • 8 channel analog signals, RS-232C, RS-422/485 and others, can be switched automatically
  • Supports analog signal up to ±25V
  • Supports max. 20Mbps
  • Switch by sending simple commands from a PC via USB
    You can use our free Application or general purpose terminal software such as TeraTerm.
  • Switch by External input
    no-voltage dry contact input or 5 to 24V DC input
  • Manual switching by using the switch on the main body of the unit
  • Controllable from embedded Linux devices
    It operates as a device of the standard CDC-ACM class.
    For Linux distributions with embedded CDC-ACM device drivers, you can use them without installing the drivers.
    We do not support the use of Linux itself.
  • Uses high-retention industrial grade USB connector
  • USB line has ESD protection
  • Includes a USB A-B cable (1.8m)
  • Includes an AC adapter
  • Non-use of 10 Restricted substances of RoHS directive
  • MADE IN JAPAN

Pinouts and Wiring between COMMON port and each channels

CONNECTION EXAMPLE

[Switching RS-232C equipment via USB]

[Switching RS-485/422 signal by external switch box]

Specification

Item Description Remarks
Model USB-404  
Input Power 5VDC, less than 150mA
Supplied through a USB port (Bus-powered) or AC adapter
Number of Switching Port 8
Analog Signal Range ±25V
Analog Signal Data Rate max. 20Mbps
LSI MAX14778 analog multiplexer ADI
Common Port D-SUB 9pin Male (#4-40 UNC)  M2.6 screws are also included in the package
Switching Port D-SUB 9pin Male x 8 (#4-40 UNC) 
Control Port USB2.0 B connector
Virtual COM Port (Support Full Speed)		 ESD protection ESD11kV
Support OS for controller side Windows 11/10/8.1/8/7 CDC driver
OS of common/switching ports are not limited
External Input Connector D-SUB 9pin Male (#4-40 UNC) M2.6 screws are also included in the package
External Input Specification No-Voltage Dry Contact Input Switch setting: VCC side
Photocoupler Isolated Input
Input: DC5 to 24V
Input impedance: 2.8KΩ
OFF to ON Voltage: more than 4.3V
ON to OFF Voltage: up to 3.6V
Minimum OFF-state Current: 0.9mA		 Switch setting: COM side
LED Power LED
Channel LED x 8
Operating Ambient Temperature -20 to 60[°C] (-4 to 140 [°F])  No condensation permitted
Operating Ambient Humidity 10 to 85%RH
Storage Ambient Temperature -20 to 60[°C] (-4 to 140 [°F]) 
Storage Ambient Humidity 10 to 85%RH
Dimensions 166 x 82 x 50 [mm]
(6.535" x 3.228" x 1.969")		 Without projections
Weight Approx. 400 [g] Only main body

* Power saving function (suspend, standby, sleep and others) is not supported.

Package Contents

  • USB-404
  • USB A-B cable 1.8m
  • AC adapter
  • Screw Lock M2.6 D-sub Connectors (#4-40 UNC Connectors are mounted by default)

Documentation

Price and Optional Accessories

Description MODEL Image List Price (JPY) Stock Status
USB Multiplexer 8:1
 USB-404 USB-201
Attachment for horizontal direction
 ACC-028 ACC-028
Attachment for DIN rail type B
 ACC-031 ACC-031
Neodymium magnet set
 ACC-036 ACC-036
D-sub 9pin to 6P adapter with FG terminal
 ACC-045 ACC-036

Accessories List

ページトップへ
[ ]

[USB-205] Support for USB 3.0 USB Multiplexer 4:1 - USB Switching Device HuMANDATA LTD.

[USB-205] Support for USB 3.0 USB Multiplexer 4:1 - USB Switching Device

RoHS10 Hi-SPEED SuperSpeed 4ch SurgeProtection.gif win_mac cdc_uart
NonChemi-Con Flame-retardant-ABS

4:1 USB Mux Supports for USB 3.0
for Extremely Fast Switching From PC

Permalink of this page:

Overview　

USB-205 is a USB 3.0 SuperSpeed (5Gbps) compliant 4 port USB multiplexer. Connect to USB port for control and transmitting a simple command from your PC, 4 port USB can be arbitrarily switch. It can promote labor-saving for testing process and auto-testing system of USB devices.
* Switching USB 3.0 port is the same as removing and re-mounting USB device. When you switch USB 3.0 port, it is necessary to confirm removing and recognizing the device by your application.

Application examples

  • Operation test of USB devices
  • Switching USB devices
USB-205

Features

  • Switch 4 USB ports
    You can switch 4-channel USB 3.0 port from controller USB 3.0 port by using virtual COM port.
  • Supports High Speed (480Mbps), SuperSpeed (5Gbps), High Speed (480Mbps), Full Speed (12Mbps) and Low Speed (1.5Mbps)
  • Simple Current Mesurement Function
    USB-205 can measure current consumption of USB device. (The measurement value is digital value and it's not calibrated.)
  • Simple Command
    You can operate with simple single character command
  • Controllable from embedded Linux devices
    It operates as a device of the standard CDC-ACM class.
    For Linux distributions with embedded CDC-ACM device drivers, you can use them without installing the drivers.
    We do not support the use of Linux itself.
  • Housing material: Plastic
  • DIN rail and screw mountable(Attachment is required)
  • Includes a USB 3.0 A-B cable (1.0m)
  • Includes a USB A-miniB cable (1.0m)
  • Includes an AC adapter
  • Non-use of 10 Restricted substances of RoHS directive
  • MADE IN JAPAN

Specification

Item Description Remarks
Model USB-205  
Input Power 5VDC Supplied by AC adapter
Common USB port USB B Connector USB3.0 SuperSpeed
USB 2.0 Hi, Full and Low Speed
ESD protection ESD8kV
Switch side USB port USB A Connector USB3.0 SuperSpeed,
USB 2.0 Hi, Full and Low Speed
ESD protection ESD8kV
Controller side USB port USB mini-B Connector USB 2.0 Full Speed
ESD protection ESD11kV
Control Method Virtual COM port Setting baud rate and other conditions is not necessary.
Support OS for controller side Windows 10/8.1/8/7/Vista/XP CDC driver
OS of switch side USB port is not limited
Status LED Power / Error x 1
Select display x 4		 Bi-color LED
Operating Ambient Temperature -10 to 60℃ (14 to 140 [°F]) No condensation permitted
Operating Ambient Humidity 30 to 85%RH No condensation permitted
Storage Ambient Temperature -10 to 60℃ (14 to 140 [°F]) No condensation permitted
Storage Ambient Humidity 30 to 85%RH No condensation permitted
Dimensions 165 x 80.5 x 39 [mm]
(6.496" x 3.169" x 1.535")		 Without projections
Weight Approx. 250 [g] Only main body

* suspend, standby and other power saving function is not supported.

Package Contents

  • USB-205
  • USB 3.0 A-B cable 1.0m
  • USB A-miniB cable 1.0m
  • AC adapter
  • Driver & Application CD

Documentation

Price and Optional Accessories

Description MODEL Image List Price (JPY) Stock Status
USB 3.0 Multiplexer 4:1
 USB-205 USB-205
Attachment for vertical direction
 ACC-027 ACC-027
Attachment for horizontal direction
 ACC-028 ACC-028
Attachment for DIN rail type B
 ACC-031 ACC-031
Neodymium magnet set
 ACC-036 ACC-036
ページトップへ
[ ]

 

 

 

[USB-206] USB 3.0 Host Multiplexer HuMANDATA LTD.

[USB-206] USB 3.0 Host Multiplexer

RoHS10 Hi-SPEED SuperSpeed 2ch SurgeProtection.gif win_mac cdc_uart
NonChemi-Con Flame-retardant-ABS

USB-206 is an active USB 3.0 multiplexer. It switches between two host PCs for one device.

Permalink of this page:

Overview　

USB-206 can multiplex USB 3.0 signal of two host PCs and connect it to a USB 3.0 device.
USB-206 can be controlled by specific USB ports and the physical switch.

Application examples

  • Share a USB printer
  • Share a USB strage
  • Exchange data between the host PCs relaying a USB strage
  • Control power of the device
USB-206

Features

  • USB3.0 SuperSpeed compatible.
    USB 2.0 High, Full and Low Speed device is also compatible.
  • One or two PCs are possible to participate to control host switching.
    Third person, which will not be a host of the device, also can be a controller.
  • Easy to control by a terminal software from control ports.
    All commands are assigned to ascii charactors.
  • Phisical switch is a vailable.
    It switches the hosts without any software controller.
  • Power control for the device.
    Turn ON/OFF by a command.
  • Device over current detection.
    It detects the over current condition of the device and automatically shut it down.
  • Dip switches for the power-on condition.
  • Controllable from embedded Linux devices
    It operates as a device of the standard CDC-ACM class.
    For Linux distributions with embedded CDC-ACM device drivers, you can use them without installing the drivers.
    We do not support the use of Linux itself.
  • Includes a USB 3.0 A-B cable (1.0m) x2
  • Includes a USB 2.0 A-B cable (1.8m) x2
  • Includes an AC adapter
  • Non-use of 10 Restricted substances of RoHS directive
  • MADE IN JAPAN

Specification

Item Description Remarks
Model USB-206  
Input Power 5V DC Supplied by AC adapter
Power Consumption About 200mA without host/device/control connections
OS limitation for hosts none  
OS limitation for controllers Windows 10/8.1/8/7/Vista/XP CDC driver
USB Connector of host USB3.0 Standard B x2 ESD protection ESD11kV
USB Connector of device USB3.0 Standard A x1 ESD protection ESD11kV
USB Connector of control USB2.0 Standard B  x2 ESD protection ESD11kV
Contorol method Serial communication via virtual COM port Baudrate is fixed at 9600bps
Hardware flow control is recommended
Status LED Power LED
Device status LED
Host status LED x2		  
Operating Ambient Temperature 0 to 60 ℃ (32 to 140 [°F]) No condensation permitted
Operating Ambient Humidity 30 to 85%RH No condensation permitted
Storage Ambient Temperature 0 to 60 ℃ (32 to 140 [°F]) No condensation permitted
Storage Ambient Humidity 30 to 85%RH No condensation permitted
Dimensions 165 x 80.5 x 39 [mm]
(6.496" x 3.169" x 1.535")		 Without projections
Weight Approx. 280 [g] Only main body

* suspend, standby and other power saving function is not supported.

Package Contents

  • USB-206
  • USB 3.0 A-B cable 1.0m x2
  • USB 2.0 A-B cable 1.8m x2
  • AC adapter
  • Driver & Application CD

Price and Optional Accessories

Description MODEL Image List Price (JPY) Stock Status
USB 3.0 Host Multiplexer
 USB-206 USB-206
Attachment for vertical direction
 ACC-027 ACC-027
Attachment for horizontal direction
 ACC-028 ACC-028
Attachment for DIN rail type B
 ACC-031 ACC-031
Neodymium magnet set
 ACC-036 ACC-036
Page Top
[ ]

[USB-201] USB Multiplexer 8:1 - USB Switching Device HuMANDATA LTD.

[USB-201] USB Multiplexer 8:1 - USB Switching Device

RoHS10 Hi-SPEED 8ch SurgeProtection.gif windows anc mac cdc_uart Flame-retardant-ABS

8:1 USB Mux Supports USB 2.0 Hi Speed Data Rates
for Extremely Fast Switching From PC

Overview

USB-201 is a USB 2.0 High Speed(480Mbps), Full Speed(12Mbps) and Low Speed(1.5Mbps) compliant 8 port USB multiplexer. Connect to USB port for control and transmitting a simple command from your PC, 8 port USB can be arbitrarily switch. It can promote labor-saving for testing process and auto-testing system of USB devices.
* Switching USB 2.0 port is the same as removing and re-mounting USB device. When you switch USB 2.0 port, it is necessary to confirm removing and recognizing the device by your application.

Application examples

  • Operation test of USB devices
  • Switching USB devices
USB-201

Features

  • Switch 8 Ports
    You can switch 8-channel USB 2.0 port from controller USB 2.0 port by using virtual COM port.
  • Supports USB 2.0 Hi Speed
    USB-201 is designed for USB 2.0 High, Full and Low Speed applications with capability of supporting data rates up to 480Mbps.
  • Simple Current Mesurement Function
    USB-201 can measure current consumption of USB device. (The measurement value is digital value and it's not calibrated.)
  • Simple Command
    You can operate with simple single character command
  • Controllable from embedded Linux devices
    It operates as a device of the standard CDC-ACM class.
    For Linux distributions with embedded CDC-ACM device drivers, you can use them without installing the drivers.
    We do not support the use of Linux itself.
  • Housing material: Plastic
  • DIN rail and screw mountable (Attachment is required)
  • Includes a USB A-B cable (1.8m)
  • Includes a USB A-miniB cable (1.0m)
  • Includes an AC adapter
  • Non-use of 10 Restricted substances of RoHS directive
  • MADE IN JAPAN

Specification

Item Description Remarks
Model USB-201  
Input Power 5VDC Supplied by AC adapter
Common USB port USB B connector USB 2.0 Hi Speed
ESD protection ESD11kV
Switch side USB port USB A connector USB 2.0 Hi Speed x 8ch
ESD protection ESD11kV
Controller side USB port USB mini-B connector USB 2.0 Full Speed
ESD protection ESD11kV
Control Method Virtual COM port Setting baud rate and other conditions is not necessary.
Support OS for controller side Windows 10/8.1/8/7/Vista/XP CDC driver
OS of switch side USB port is not limited
LED Power / Error　x 1
Select display x 8		 Bi-color LED
Key Device MAX4999 USB2.0 multiplexer Maxim Integrated
Operating Ambient Temperature 0 to 60℃ (32 to 140 [°F]) No condensation permitted
Operating Ambient Humidity 30 to 85%RH No condensation permitted
Storage Ambient Temperature -20 to 55℃ (-4 to 131 [°F]) No condensation permitted
Storage Ambient Humidity 30 to 85%RH No condensation permitted
Dimensions 165 x 80.5 x 39 [mm]
(6.496" x 3.169" x 1.535")		 Without projections
Weight Approx. 300 [g]  

* suspend, standby and other power saving function is not supported.

Package Contents

    • USB-201
    • USB A-B cable 1.8m
    • USB A-miniB cable 1.0m
    • AC adapter

Price and Optional Accessories

Description MODEL Image List Price (JPY) Stock Status
USB Multiplexer 8:1
 USB-201 USB-201
Attachment for vertical direction
 ACC-027 ACC-027
Attachment for horizontal direction
 ACC-028 ACC-028
Attachment for DIN rail type B
 ACC-031 ACC-031
Neodymium magnet set
 ACC-036 ACC-036
ページトップへ
[ ]

 

 

 

HDL00
© HuMANDATA LTD. - Altera & Xilinx FPGA Boards manufacturer in Japan - 2016