USB Converter

[USB-050V] 2 Channel USB Analog Voltage Monitor HuMANDATA LTD.

[USB-050V] 2 Channel USB Analog Voltage Monitor

RoHS10 2ch.gif 10V TB Isolated Surge Protection cdc_uart
NonChemi-Con Flame-retardant-ABS

Measurement data from 2 analog channels (±10V)
can be acquired via USB.
The USB interface is independently isolated from each channel.

Permalink of this page:

Overview

USB-050V is a voltage monitor capable of measuring two channels of analog voltage (±10 V) via USB. The USB interface and each channel are independently isolated. An A/D converter is provided for each channel, enabling simultaneous measurement of two channels.

Power is supplied from the computer via the USB connection. When using a USB hub or similar device for branching, ensure that a stable power supply is provided to prevent voltage drops. If the voltage is insufficient, stable measurement may not be possible.

By using the included application software, USB-050V Voltage Monitor, measurement results, scaling values, and chart displays can be viewed on a computer.
In addition, by using the dedicated control commands, analog voltage (±10 V) measurements can also be performed from a custom application.

USB-050V

* Second and subsequent images are CG models

Features

  • Measurement data from 2 analog channels (±10 V) can be acquired via USB.
  • Measurement Range: ±10 V
  • Measurement Accuracy: ≤ ±0.05% FS
  • USB side and each channel are electrically isolated (2500 VDC)
  • Enables voltage monitoring, scaling, and chart visualization via the supplied software.
  • Enables measurement of analog voltage (±10 V) from user applications using dedicated control commands.
  • Controllable from embedded Linux devices
    It operates as a device of the standard CDC-ACM class.
    For Linux distributions with embedded CDC-ACM device drivers, you can use them without installing the drivers.
    We do not support the use of Linux itself.
  • Easy control via virtual COM port with USB connection to a PC
  • No external power supply is required
    USB-050V is powered through a USB port (Bus-powered)
  • ESD and surge protection
  • Pluggable the screw terminal
  • Housing material: Plastic
  • DIN rail, magnet, and screw mountable (Attachment is required)
  • Includes a USB cable (1.8 m)
  • Free from the 10 RoHS-restricted substances.
  • MADE IN JAPAN

Specification

Item Description Remarks
Model USB-050V
Input Power 5 VDC
Supplied via USB cable		 No external power supply required
Current Consumption 450 mA max.
HOST Interface USB 2.0 compliant (Full-Speed supported)
USB-B connector		 USB 1.1 compatible
ESD protection ESD11kV
USB connector Standard Type B Female
Voltage Input Connector Detachable terminal block
2-pin / 5 mm pitch × 2		 Molex
Model: 39520-0002
Number of Channels 2
Measuring Range ±10 V
Resolution 24-bit A/D Converter (ADC)
Measurement Accuracy ≤ ±0.05% FS (−20 to 50°C)
≤ ±0.03% FS (0 to 40°C)
Isolation Method Independent bus isolation
Isolation Protection 2500 VDC Designed value
Built-in LSI General-purpose microcontroller
4-20 mA ADC
LED PWR: Power LED
Control Method Communication control via virtual COM port
Operating Ambient Temperature -20 to 50°C (-4 to 122°F) No condensation permitted
Operating Ambient Humidity 30 to 85% RH No condensation permitted
Storage Ambient Temperature -20 to 60°C (-4 to 140°F) No condensation permitted
Storage Ambient Humidity 30 to 85% RH No condensation permitted
Weight Approx. 90 g Only main body
Dimensions 67 x 67 x 28 mm
(2.638" x 2.638" x 1.102")		 Without projections

* There is a case to be changed to the parts of the compatibility.
* Power saving function (suspend, standby, sleep and others) is not supported

Application

This application runs on Windows and supports Windows 11 and Windows 10. By sending control commands to the device via USB, the application can output current from the device.
The application provides the following main functions:

  • Display of measured values (voltage) and scaled values
  • Real-time chart display
  • Measurement log display
  • Scaling configuration
  • Sampling and logging interval configuration
  • CSV file generation and export
    and more

USB-050 Voltage Monitor download page.

Voltage Input connector (PIN ASSIGNMENT)

Symbol Description
− Voltage Input (−)
＋ Voltage Input (＋)


*Illustration showing the detachable terminal block removed.

Package Contents

  • USB-050V
  • USB cable 1.8 m

Price and Optional Accessories

Description MODEL Image List Price (JPY) Stock Status
2 Channel USB Analog Voltage Monitor
 USB-050V USB-050V
Attachment with clamping screw
 PEN-003 PEN-003
Attachment for 35mm DIN rail
 PEN-003-DIN PEN-003-DIN
Attachment with neodymium magnet
 PEN-003-MG PEN-003-MG
Page top
[ ]

[USB-034] USB to 4-20mA Generator HuMANDATA LTD.

[USB-034] USB to 4-20mA Generator  Rev2

RoHS10 VCCI 4-20mA TB Isolated SurgeProtection CDC UARR
NonChemi-Con Flame-retardant-ABS

High-precision control of 4–20 mA current output via USB.
Isolation between the USB and 4-20 mA output side.

Permalink of this page:

Overview

USB-034 is a generator that allows control of 4-20 mA signals from a computer via USB. The USB side and the 4-20 mA output side are electrically isolated. It also includes a built-in loop power supply for the 4-20 mA side.
USB-034 can be used as a 4-20 mA signal generator when utilizing a computer for instrumentation and control applications.
Dedicated control commands are also provided, allowing the 4-20 mA output to be controlled from your own custom applications.

USB-034

Features

  • A generator that outputs 4-20 mA current via USB.
  • USB side and the 4-20 mA output side are electrically isolated (1500 VDC)
  • Output Accuracy: 0.05 % FS or less (@25 °C)
  • Built-in loop power supply for the 4-20 mA side (switch selectable)
  • Easy control via virtual COM port with USB connection to a PC
  • Enables 4-20 mA current output, auto-step, and auto-sweep operation via the included application
  • Enables 4-20 mA output from user applications using dedicated control commands
  • Controllable from embedded Linux devices
    It operates as a device of the standard CDC-ACM class.
    For Linux distributions with embedded CDC-ACM device drivers, you can use them without installing the drivers.
    We do not support the use of Linux itself.
  • No external power supply is required
    USB-034 is powered through a USB port (Bus-powered)
  • ESD and surge protection
  • Pluggable the screw terminal
  • Housing material: Plastic
  • DIN rail, magnet, and screw mountable (Attachment is required)
  • Includes a USB cable (1.8 m)
  • Free from the 10 RoHS-restricted substances.
  • MADE IN JAPAN

Specifications

Item Description Remarks
Model USB-034
Input Power 5 VDC/400 mA max.
Supplied through a USB port (Bus-powered)		 No external power supply required
HOST Interface USB 2.0 compliant
(Support Full Speed)		 USB 1.1 compatible
ESD protection ±11 KV
Output Connector 3-pin terminal block Phoenix Contact
Model: 1759020
Output Range 4-20 mA or 3.2-24 mA Selectable by command
Resolution 16-bit D/A Converter (DAC)
Output Accuracy 0.05 % FS or less (@25 °C) When output range is 4-20 mA
Alarm Current Downscale alarm current: 3.2 mA
Upscale alarm current: 22.8 / 24 mA		 Selectable by command
External Loop Power Supply 20-52 VDC Drive capability varies depending on the supplied voltage.
Load Resistance When using built-in loop power supply: 1200 Ω max.
When using external loop power supply: 1200 Ω max. (@52 VDC)
500 Ω max. (@24 VDC)
Isolation Method Bus isolation
Isolation Protection 1500 VDC Designed value
LSI General-purpose microcontroller
4-20cmA DAC
LED Status LED x 2
Power LED
Control Method Communication control via virtual COM port
Operating Ambient Temperature -20 to 60 ℃ (-4 to 140 °F) No condensation permitted
Operating Ambient Humidity 30 to 85 %RH No condensation permitted
Storage Ambient Temperature -20 to 60 ℃ (-4 to 140 °F) No condensation permitted
Storage Ambient Humidity 30 to 85 %RH No condensation permitted
Noise Immunity Not specified
Compliance Standards VCCI Class B
Weight Approx. 90 g Only main body
Dimensions 67 x 67 x 28 mm
(2.638" x 2.638" x 1.102")		 Without projections

* Power saving function (suspend, standby, sleep and others) is not supported

Application

This application runs on Windows and supports Windows 11 and Windows 10. By sending control commands to the device via USB, the application can output current from the device.
The application provides the following main functions:

  • Current output using 4-20 mA current set values
  • Current output using scaling settings
  • Auto Step output
  • Auto Sweep output
    and more

USB to 4-20mA GeneratorUSB to 4-20 mA Generator download page.

Interface Terminal (PIN ASSIGNMENT)

pin assinment
Pin No Signal
1 Current Terminal (+)
2 Current Terminal (−)
3 Loop Power (LP)

Package Contents

  • USB-034
  • USB cable 1.8 m

Price and Optional Accessories

Description MODEL Image List Price
JPY (JPY)		 Stock Status
USB to 4-20mA Generator
 USB-034 USB-034
Attachment with clamping screw
 PEN-003 PEN-003
Attachment for 35mm DIN rail
 PEN-003-DIN PEN-003-DIN
Attachment with neodymium magnet
 PEN-003-MG PEN-003-MG
Detachable 3P Terminal Connector (5.08mm)
1757022 (Phoenix)
(Additional purchase) 		TB-USB-3 TB-USB-3

Accessories List

Page top
[ ]

[USB-511] USB to RS-232C Converter Compact HuMANDATA LTD.

[USB-511] USB to RS-232C Converter Compact (Configurable serial settings)

RoHS10 RS232 DB9 Isolated cdc_uart
NonChemi-Con Flame-retardant-ABS.gif

Supports up to 1 Mbps, and custom baud rate
Configurable data length, stop bits, and parity check settings.

Permalink of this page:

Overview

USB-511 is a USB to RS232C converter that isolated with 2500VDC between RS232C and a USB port. It supports High Speed baud rates of up to 1Mbps. The device driver uses the standard CDC (Communication Device Class) driver included in the OS.

USB-511
 

Features

  • Supports RS232C
  • 2500VDC bus isolation
  • Baud rate up to 1Mbps
  • Supports custom baud rate
  • Configurable data length, stop bits, and parity check settings.
    (The low-cost version, USB-501, has these settings fixed.)
  • Auto transmit data control
    Built-in USB-serial chip has auto transmit controller and the driver is activated when it transmit the data
  • Controllable from embedded Linux devices
    It operates as a device of the standard CDC-ACM class.
    For Linux distributions with embedded CDC-ACM device drivers, you can use them without installing the drivers.
    We do not support the use of Linux itself.
  • No external power supply is required
    USB-511 is powered through a USB port (Bus-powered)
  • Reliable industrial grade design
  • ESD and surge protection
  • Housing material: Plastic
  • DIN rail, magnet, and screw mountable (Attachment is required)
  • Includes a USB cable (1.8m)
  • Free from the 10 RoHS-restricted substances.
  • MADE IN JAPAN

Specification

Item Description Remarks
Model USB-511  
Input Power 5VDC
Supplied through a USB port (Bus-powered)		 No external power supply required
Current Consumption Less than 100 mA  
I/O Interface RS-232C ESD protection ESD_15kV
Communication Method Asynchronous Serial
Communication		  
HOST Interface USB 2.0 compliant
Support Full Speed (12 Mbps)		 USB 1.1 compatible
ESD protection ESD_11kV
Baud Rate 1,200 bps to 1 Mbps Support custom baud rate
Data Bits 7 or 8 bit  
Stop Bits 1 or 2 bit  
Parity Even, Odd, No-parity, Mark, Space  
Flow control RTS/CTS (Fixed)  
FIFO RX Buffer Size 384 bytes  
FIFO TX Buffer Size 128 bytes  
Isolation Method Bus Isolation  
Isolation Protection 2500VDC Designed value
USB Driver Virtual COM port driver  
Support OS Windows 11/10/8.1/8/7  
LED PWR: USB bus power
TX/RX: Transmit/Receive data, Bi-color LED		  TX: green, RX: red
USB Connector Standard Type B Female  
RS232C Connector D-SUB 9pin Male (#4-40 UNC)  
Operating Ambient Temperature -20 to 60℃ (-4 to 140 [°F]) No condensation permitted
Operating Ambient Humidity 30 to 85%RH
Storage Ambient Temperature -20 to 60℃ (-4 to 131 [°F])
Storage Ambient Humidity 30 to 85%RH
Weight Approx. 50 [g] Only main body
Dimensions 67 x 43.5 x 27 [mm]
(2.638" x 1.713" x 1.063")		 Without projections

* Power saving function (suspend, standby, sleep and others) is not supported

RS232C Connector pinouts

RS232C
Pin No Name Direction Notes
1 NC -  
2 RXD IN Receive data
3 TXD OUT Transmit data
4 DTR OUT Data terminal ready
5 GND - Signal ground
6 DSR IN Data set ready
7 RTS OUT Request to send
8 CTS IN Clear to send
9 NC -  
CASE FG - Connected to GND

Package Contents

  • USB-511
  • USB cable 1.8m

Price and Optional Accessories

Description MODEL Image List Price (JPY) Stock Status
USB to RS-232C Converter Compact
 USB-511 USB-511
Attachment with clamping screw *
 PEN-003 PEN-003
Attachment for 35mm DIN rail *
 PEN-003-DIN PEN-003-DIN
Attachment with neodymium magnet *
 PEN-003-MG PEN-003-MG
D-sub 9pin - TB Adapter with FG Terminal
 ACC-045 ACC-045

* These accessories attach to the product horizontally only.

Page top
[ ]

[USB-507] USB to RS485 Converter Compact (MAX 6Mbps) HuMANDATA LTD.

[USB-507] USB to RS485 Converter Compact (MAX 6Mbps) 

RoHS10RS485TBIsolatedSurgeProtection.gifdmx512
NonChemi-ConFlame-retardant-ABS.gif

Compact isolated USB RS-485 Converter
 

Permalink of this page:

Overview

USB-507 is a USB to RS485 converter that can use RS-485 from USB interfaces. This is an insulation type that can be used safely even in the FA environment.

USB-507
 

Features

  • Supports RS485 (Half Duplex)
  • 2000VDC bus isolation
    USB side and RS-485 side are isolated
  • Baud rate up to 6 Mbps
  • Supports custom baud rate
  • Auto transmit data control
    Built-in USB-serial chip has auto transmit controller and the driver is activated when it transmit the data
  • Built-in fail-safe bias resisters
  • Termination resistance setting switch
  • Pluggable the screw terminal
  • No external power supply is required
    USB-507 is powered through a USB port (Bus-powered)
  • Reliable industrial grade design
  • ESD and surge protection
    CE-certified USB-003 is also available
  • Housing material: Plastic
  • DIN rail, magnet, and screw mountable (Attachment is required)
  • Includes a USB cable (1.8m)
  • Free from the 10 RoHS-restricted substances.
  • MADE IN JAPAN
Eye pattern of upstream tests

Reference data

USB Compliance test
Eye pattern of upstream tests
USB2.0Test Report

Specification

Item Description Remarks
Model USB-507  
Input Power 5VDC
Supplied through a USB port (Bus-powered)		 No external power supply required
Current Consumption Less than 250 mA  
I/O Interface RS485 (2-wire) ESD protection ESD_15kV
HOST Interface USB 2.0 compliant
Support High/Full Speed		 USB 1.1 compatible
ESD protection
Baud Rate 300 bps to 6 Mbps Support custom baud rate
Data Bits 7 or 8 bit  
Stop Bits 1 or 2 bit  
Parity Even, Odd, No-parity  
FIFO RX Buffer Size 1024 bytes  
FIFO TX Buffer Size 1024 bytes  
Isolation Method Bus Isolation  
Isolation Protection 2000VDC Designed value
Processor FT232H FTDI
USB Driver Virtual COM port driver  
Support OS Windows 11/10/8.1/8/7  
LED PWR: USB bus power
RX: Receive data
TX: Transmit data		  
USB Connector USB2.0 Type-B Female  
RS485 Connector Pluggable the screw terminal 5pin (PHOENIX CONTACT) 3.5mm pitch
Operating Ambient Temperature -20 to 60℃ (-4 to 140 [°F]) No condensation permitted
Operating Ambient Humidity 10 to 90%RH No condensation permitted
Storage Ambient Temperature -20 to 60℃ (-4 to 140 [°F]) No condensation permitted
Storage Ambient Humidity 10 to 90%RH No condensation permitted
Weight Approx. 70 [g] Only main body
Dimensions 67 x 43.5 x 27 [mm]
(2.638" x 1.713" x 1.063")		 Without projections

* Power saving function (suspend, standby, sleep and others) is not supported

RS485 Connector pinouts

Terminal block can be plugged and unplugged while tired. But do not connect or disconnect the terminal block while the power is on. Ground connection is recommended.

Signal Signal and Polarity
RS485C B SD/RD -
A SD/RD +
GND Signal ground
B SD/RD -
A SD/RD +

Package Contents

  • USB-507
  • USB cable 1.8m
  • Driver & Application CD

Price and Optional Accessories

Description MODEL Image List Price (JPY) Stock Status
USB to RS485 Converter Compact
 USB-507 USB-507
Attachment with clamping screw
 PEN-003 PEN-003
Attachment for 35mm DIN rail
 PEN-003-DIN PEN-003-DIN
Attachment with neodymium magnet
 PEN-003-MG PEN-003-MG
Detachable 5P Terminal Connector
1840395 (Phoenix)
(Additional purchase) 		TB35-USB-5 TB35-USB-5
Page top
[ ]

[USB-508] USB to RS485/422 Converter Compact HuMANDATA LTD.

[USB-508] USB to RS485/422 Converter Compact MAX 12Mbps

RoHS10RS485RS422TBIsolatedSurgeProtection.gifdmx512
NonChemi-ConFlame-retardant-ABS.gif

Compact isolated USB RS-485/422 Converter
 

Permalink of this page:

Overview

USB-508 is a USB to RS485/422 converter that can use RS-485/422 from USB interfaces. This is an insulation type that can be used safely even in the FA environment.

USB-508
 

Features

  • Supports RS-485/422 (Full-duplex)
  • 2000VDC bus isolation
    USB side and RS-485/422 side are isolated
  • Baud rate up to 12 Mbps
  • Supports custom baud rate
  • Auto transmit data control
    Built-in USB-serial chip has auto transmit controller and the driver is activated when it transmit the data
  • Built-in fail-safe bias resisters
  • Termination resistance setting switch
  • Pluggable the screw terminal
  • No external power supply is required
    USB-508 is powered through a USB port (Bus-powered)
  • Reliable industrial grade design
  • ESD and surge protection
    CE-certified USB-003 is also available
  • Housing material: Plastic
  • DIN rail, magnet, and screw mountable (Attachment is required)
  • Includes a USB cable (1.8m)
  • Free from the 10 RoHS-restricted substances.
  • MADE IN JAPAN
Eye pattern of upstream tests

Reference data

USB Compliance test
Eye pattern of upstream tests
USB2.0Test Report

Specification

Item Description Remarks
Model USB-508  
Input Power 5VDC
Supplied through a USB port (Bus-powered)		 No external power supply required
Current Consumption Less than 250 mA  
I/O Interface RS-485/422 (4-wire) ESD protection ESD_15kV
HOST Interface USB 2.0 compliant
Support High/Full Speed		 USB 1.1 compatible
ESD protection
Baud Rate 300 bps to 6M/8M/12M bps Support custom baud rate
Data Bits 7 or 8 bit  
Stop Bits 1 or 2 bit  
Parity Even, Odd, No-parity  
FIFO RX Buffer Size 1024 bytes  
FIFO TX Buffer Size 1024 bytes  
Isolation Method Bus Isolation  
Isolation Protection 2000VDC Designed value
Processor FT232H FTDI
USB Driver Virtual COM port driver  
Support OS Windows 11/10/8.1/8/7  
LED PW: USB bus power
TX/RX: Transmit/Receive data
(Bi-Color LED)		 TX: GREEN
RX: RED
USB Connector USB2.0 Type-B Female  
RS-485/422 Connector 5pin Detachable screw terminal PHOENIX CONTACT
3.5mm pitch
Operating Ambient Temperature -20 to 60℃ (-4 to 140 [°F]) No condensation permitted
Operating Ambient Humidity 10 to 90%RH
Storage Ambient Temperature -20 to 60℃ (-4 to 140 [°F])
Storage Ambient Humidity 10 to 90%RH
Weight Approx. 70 [g] Only main body
Dimensions 67 x 43.5 x 27 [mm]
(2.638" x 1.713" x 1.063")		 Without projections

* Power saving function (suspend, standby, sleep and others) is not supported

RS485/422 Connector pinouts

Terminal block can be plugged and unplugged while tired. But do not connect or disconnect the terminal block while the power is on. Ground connection is recommended.

Signal Signal and Polarity
RS485C Z SD -
Y SD +
GND Signal ground
B RD -
A RD +

Package Contents

  • USB-508
  • USB cable 1.8m
  • Driver & Application CD

Price and Optional Accessories

Description MODEL Image List Price (JPY) Stock Status
USB to RS485/422 Converter Compact
 USB-508 USB-508
Attachment with clamping screw
 PEN-003 PEN-003
Attachment for 35mm DIN rail
 PEN-003-DIN PEN-003-DIN
Attachment with neodymium magnet
 PEN-003-MG PEN-003-MG
Detachable 5P Terminal Connector
1840395 (Phoenix)
(Additional purchase) 		TB35-USB-5 TB35-USB-5
Page top
[ ]
  1. [USB-503-RJ45] USB to RS485 Converter (RJ45 type) HuMANDATA LTD.
  2. [USB-305] USB RS485/422 Converter (Heavy-duty type) HuMANDATA LTD.
  3. USB RS485/RS422 Converter
  4. USB RS232 Converter

Page 1 of 3

HDL00
© HuMANDATA LTD. - Altera & Xilinx FPGA Boards manufacturer in Japan - 2016