Print

[LNX-002] RS-232C LAN Converter (PoE/Non-PoE) Rev3

RoHS10CELANPoEmicroSDRS232DB9SurgeProtection
NonChemi-ConFlame retardant ABS

Possible to control RS-232C devices via Ethernet
Easy configuration by microSD

Permalink of this page:
LNX-002 is a LAN converter which makes it possible to use RS-232C devices via Ethernet local area network.  LNX-002e is an economy model of LNX-002 which only PoE function is removed. LNX-002 has obtained the CE marking.(except for PoE function)CE

Overview

LNX-002 is a LAN converter which makes it possible to use RS-232C devices via Ethernet local area network.  Tunneling mode is available by connecting with LNX-001 (USB to LAN converter) or LNX-002.  And by using TCP/UDP or Telnet, direct control from PC is also available.
LNX-002 supports PoE function as a standard model, making it possible to be powered via LAN cable (PoE compatible HUB or other is required).  It can also be operated from AC adapter. LNX-002e is an economy model of LNX-002 from which only PoE function is removed. It requires AC adapter for power supply.
Network setting can be set by a microSD card. Restoring the setting information from a microSD card is very convenient when replacing LNX-002.
LNX-002LNX-002
*Attachment A for panel mount is separately sold part.

Features

  • Possible to control RS-232C devices via Ethernet local area network
  • Tunneling mode is available by connecting with the two LNX-002
  • Half-duplex / Full-duplex (auto detected)
  • Easy configuration by microSD
    • It is easily restored at the time of the exchange by microSD.
    • It can send configuration data by e-mail attachments.
    • It is setable in PC out of the network segment.
    • Backup of the configuration data is easy.
  • Configuration is possible via LAN by LNX SETTING TOOL
  • Possible power supply from the LAN cable by PoE function
  • Supports Virtual COM port
  • Reliable industrial grade design
  • ESD and surge protection
  • Housing material: Plastic
  • DIN rail, magnet, and screw mountable (Attachment is required)
  • Includes a microSD card (with USB adapter)
  • Includes an AC adapter
  • RoHS and CE compliant CE(except for PoE function)
  • MADE IN JAPAN

Connection example

[Tunneling mode between two LNX-002]

RS-232CLNX-002LANLNX-002RS-232C

Direct communication between the two LNX-002 without PCs offers you to connect separated a RS-232C networks. By using cross cable, one to one connection is also available.

[Tunneling mode between LNX-001 and LNX-002]

WIN PCLNX-001LANLNX-002RS-232C

LNX-001 offers you to control as USB interface via the LAN. By connecting this with LNX-003 in tunneling mode, virtual COM port and D2XX-API by FTDI is available.
Technical knowledge about the network is not needed.


[LNX-002 single operation]

WIN PCLAN LNX-002RS-232C
Communication with RS-232C devices via Ethernet local area network is available.

[Connection to the printer]

LNX-002LANLAN
LNX-002 can output the RS232C data to the LAN-compatible printers.
*When the RS232C data do not match to a printer, it may not be printed. Please feel free to ask us about that by an inquiry form or e-mail.

Specification

Item Description Remarks
Model LNX-002/LNX-002e  
Input Power 5VDC
Supplied by AC adapter or by LAN connector (PoE function)
(LNX-002e is not supported the PoE function)
PoE
PoE function supports both mode A and B
Current Consumption Less than 350 mA  
Network Interface IEEE802.3(10Base-T)
IEEE802.3u(100Base-TX)
half-duplex / full-duplex (auto detected)
 
LAN Connector RJ45 ESD protection
ESD11kV
Isolation over 1500VDC
Protocol TCP/UDP/Telnet  
Interface RS-232C ESD protection
ESD15kV
RS232C Connector D-SUB 9pin Male (#4-40 UNC)  
Memory Card microSD card For configuration
Baud Rate 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 bps  
Data Bits 7 or 8 bits  
Stop Bits 1 or 2 bits  
Parity Even, Odd, No parity  
LED POW: Power LED
RX: Reception LED
TX: Transmission LED
SYS: System Status LED
LINK (RJ45 Connector): LINK Status
ACT (RJ45 Connector): ACT Status
 
Operating Ambient Temperature -10 to +55 °C No condensation permitted
Operating Ambient Humidity 30 to 85 % RH No condensation permitted
Storage Ambient Temperature -20 to +60 °C No condensation permitted
Storage Ambient Humidity 30 to 85 % RH No condensation permitted
Noise Tolerance Not defined  
Transmission and other Standard Not defined  
CE Compliant EMS:EN61000-6-2
- IEC61000-4-2 Electrostatic discharge requirements
- IEC61000-4-3 Radiated electromagnetic field requirements
- IEC61000-4-4 Electrical fast transient burst requirements
- IEC61000-4-5 Surge immunity test requirements
- IEC61000-4-6 Conducted radio frequency requirements
EMI:EN61000-6-4
- EN61000-6-4(2007)+A1(2011) Radiated Emissions
- EN61000-6-4(2007)+A1(2011) Conducted Emissions
CE
This product has applied the common standard for industrial environment EN61000-6-2 and EN61000-6-4
(except for PoE function)
Weight Approx. 120 [g] Only main body
Dimensions 69 x 82.5 x 30 [mm]
(2.638" x 3.248" x 1.181")
Without projections

RS232C Connector pinouts

Pin No Name Direction Notes
1 (DCD) IN Not supported
2 RXD IN  
3 TXD OUT  
4 DTR OUT  
5 GND - Signal ground
6 DSR IN  
7 RTS OUT  
8 CTS IN  
9 (RI) IN Not supported
CASE FG - Connected to GND

LNX SETTING TOOL

This application makes configured data of the LNX series.

After saving the configuration data to the microSD, and insert the product it.
It will be automatically set by turning on the power of LNX-002.
Then backup file is made to microSD card automatically.

Package Contents

  • LNX-002 or LNX-002e
  • microSD card(with USB adapter)
  • AC adapter
  • Driver & Application CD

Price and Optional Accessories

Description MODEL Image List Price (JPY) Stock Status
RS232C LAN Converter Rev3 LNX-002 LNX-002
PoE
RS232C LAN Converter
economy type Rev3
LNX-002e LNX-002e
Not supported
PoE function
Attachment with clamping screw PEN-003 PEN-003
Attachment for 35mm DIN rail
PEN-003-DIN PEN-003-DIN
Attachment with neodymium magnet
PEN-003-MG PEN-003-MG
ページトップへ
[]