LNX製品
[LNX-004 Rev2] RS-485/422 LAN Converter (D-sub9 pin type) HuMANDATA LTD.
[LNX-004] RS-485/422 LAN Converter [D-sub 9pin type] (PoE/Non-PoE) Rev2
Possible to control RS-485/422 devices via Ethernet
Easy configuration by microSD
LNX-004 is a LAN converter which makes it possible to use RS-485/422 devices via Ethernet local area network. LNX-004e is an economy model of LNX-004 which only PoE function is removed.
LNX-004 has obtained the CE marking.(except for PoE function)
Overview
LNX-004 is a LAN converter which makes it possible to use RS-485/422 devices via Ethernet local area network. RS-485/422 side is isolated and the LAN interface is also isolated, so LNX-004 consists of double isolation. Tunneling mode is available by connecting with LNX-001 (USB to LAN converter) or LNX-004. In that case, connecting with devices in other RS-485/422 network is possible. And by using TCP/UDP or Telnet, direct control from PC is also available.
LNX-004 supports PoE function as a standard model, making it possible to be powered via LAN cable (PoE compatible HUB or other is required). It can also be operated from AC adapter. LNX-004 is an economy model of LNX-004 from which only PoE function is removed. It requires AC adapter for power supply.
Network setting can be set by a microSD card. Restoring the setting information from a microSD card is very convenient when replacing LNX-004.
*Attachment A for panel mount is separately sold part.
■ Tonneling mode example
By using TCP/IP or Telnet, direct control from PC is also available.
Features
- Possible to control RS-485/422 devices via Ethernet local area network
- Tunneling mode is available by connecting with two LNX-004
- Half-duplex / Full-duplex (auto detected)
-
Easy configuration by microSD
- It is easily restored at the time of the exchange by microSD.
- It can send configuration data by e-mail attachments.
- It is setable in PC out of the network segment.
- Backup of the configuration data is easy.
- Configuration is possible via LAN by LNX SETTING TOOL
- Possible power supply from the LAN cable by PoE function
- Supports Virtual COM port
- Reliable industrial grade design
- ESD and surge protection
- Housing material: Plastic
- DIN rail, magnet, and screw mountable (Attachment is required)
- Includes a microSD card (with USB adapter)
- Includes an AC adapter
- RoHS and CE compliant (except for PoE function)
- MADE IN JAPAN
Connection example
[Tunneling mode between two LNX-004]
[Tunneling mode between LNX-001 and LNX-004]
LNX-001 offers you to control as USB interface via the LAN. By connecting this with LNX-004 in tunneling mode, virtual COM port and D2XX-API by FTDI is available.
[LNX-004 single operation]
Communication with RS-485/422 devices via Ethernet local area network is available.
Specification
Item | Description | Remarks |
---|---|---|
Model | LNX-004/LNX-004e | |
Power |
5VDC Supplied by AC adapter or by LAN connector (PoE function) (LNX-004e is not supported the PoE function) |
PoE function supports both mode A and B |
Current Consumption | Less than 350 mA | |
Network Interface |
IEEE802.3(10Base-T) IEEE802.3u(100Base-TX) half-duplex / full-duplex (auto detected) |
|
LAN Connector | RJ45 |
ESD protection Isolation over 1500VDC |
Protocol | TCP/UDP/Telnet | |
Interface |
RS-485 / RS-422 (2 wire or 4 wire) isolated from inner circuit (DC3000V) |
ESD protection |
Connector | D-SUB 9pin Male (#4-40 UNC) | M2.6 screws are also included in the package |
Memory Card | microSD card | For configuration |
Baud Rate | 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 bps | |
Data Bits | 7 or 8 bits | |
Stop Bits | 1 or 2 bits | |
Parity | Even, Odd, No parity | |
LED |
PWR: Power LED RX: Reception LED TX: Transmission LED SYS: System Status LED LINK (RJ45 Connector): LINK Status ACT (RJ45 Connector): ACT Status |
|
Operating Ambient Temperature | -10 to +55 °C | No condensation permitted |
Operating Ambient Humidity | 30 to 85 % RH | No condensation permitted |
Storage Ambient Temperature | -20 to +60 °C | No condensation permitted |
Storage Ambient Humidity | 30 to 85 % RH | No condensation permitted |
CE Compliant |
EMS:EN61000-6-2 - IEC61000-4-2 Electrostatic discharge requirements - IEC61000-4-3 Radiated electromagnetic field requirements - IEC61000-4-4 Electrical fast transient burst requirements - IEC61000-4-5 Surge immunity test requirements - IEC61000-4-6 Conducted radio frequency requirements EMI:EN61000-6-4 - EN61000-6-4(2007)+A1(2011) Radiated Emissions - EN61000-6-4(2007)+A1(2011) Conducted Emissions |
This product has applied the common standard for industrial environment EN61000-6-2 and EN61000-6-4 (except for PoE function) |
Weight | Approx. 120 [g] | Only main body |
Dimensions |
69 x 82.5 x 30 [mm] (2.638" x 3.248" x 1.181") |
Without projections |
RS232C Connector pinouts
D-sub 9 pin male connector
#4-40 UNC screws are mounted by factory setting. You can change them to attached M2.6 screws.
Pin No | Name | Direction | Notes |
---|---|---|---|
1 | RD + | IN | Receive data + |
2 | RD - | IN | Receive data - |
3 | SD + | OUT | Transmit data + |
4 | SD - | OUT | Transmit data - |
5 | GND | - | Signal ground |
6 | (GND) | - | (Signal ground) |
7 | (GND) | - | (Signal ground) |
8 | (GND) | - | (Signal ground) |
9 | (GND) | - | (Signal ground) |
CASE | FG | - |
Frame Ground (Connected to GND) |
LNX SETTING TOOL
This application makes configured data of the LNX series.
After saving the configuration data to the microSD, and insert the product it.
It will be automatically set by turning on the power of LNX-004.
Then backup file is made to microSD card automatically.
Package Contents
- LNX-004 or LNX-004e
- microSD card (with USB adapter)
- AC adapter
- Driver & Application CD
Documentation
Price and Optional Accessories
Description | MODEL | Image | List Price (JPY) | Stock Status |
---|---|---|---|---|
RS-485/422 LAN Converter [DB9 type] Rev2 |
LNX-004 |
|
||
RS-485/422 LAN Converter [DB9 type] economy type Rev2 |
LNX-004e |
Not supported PoE function |
||
Attachment with clamping screw |
PEN-003 | |||
Attachment for 35mm DIN rail |
PEN-003-DIN | |||
Attachment with neodymium magnet |
PEN-003-MG |
Ordering
[LNX-003M Rev2] RS-485 LAN Converter for Modbus HuMANDATA LTD.
[LNX-003M] RS-485 LAN Converter for Modbus (PoE/Non-PoE) Rev2
Possible to integrate Modbus TCP and RTU/ASCII networks
Easy configuration by microSD
LNX-003M is a LAN converter which makes it possible to use Modbus RTU/ASCII devices via Ethernet local area network. LNX-003Me is an economy model of LNX-003M which only PoE function is removed.
LNX-003M has obtained the CE marking.(except for PoE function)
Overview
LNX-003M can convert protocols from Modbus TCP to Modbus RTU/ASCII. LNX-003M can connect Modbus devices over Ethernet by acting as masters or slaves. Although Modbus can be used for both serial and Ethernet devices, protocol conversions are also required to interconnect, because not only the physical connection of serial and Ethernet communications, but also the protocol is different. LNX-003M allows you to integrate Modbus TCP and Modbus RTU/ASCII networking.
You can use Lantronix Com Port Redirector (CPR) of the software that maps Virtual COM ports on a PC platform. It redirects application data destined to an attached device via the PC’s local serial (COM) port. Rather than going out the local port, the data is transmitted across the Ethernet network using TCP/IP. LNX-003e attached to the network receives the data and transfers it from its own serial port to the attached equipment.
LNX-003M supports PoE function as a standard model, making it possible to be powered via LAN cable (PoE compatible HUB or other is required). It can also be operated from AC adapter. LNX-003Me is an economy model of LNX-003M from which only PoE function is removed. It requires AC adapter for power supply.
Network setting can be set by a microSD card. Restoring the setting information from a microSD card is very convenient when replacing LNX-003M.
Features
- Possible to control RS-485 devices via Ethernet local area network
- Modbus TCP and Modbus RTU/ASCII protocols can be converted.
- Supports Virtual COM port
- Half-duplex / Full-duplex (auto detected)
- Easy configuration by microSD
- It is easily restored at the time of the exchange by microSD.
- It can send configuration data by e-mail attachments.
- It is setable in PC out of the network segment.
- Backup of the configuration data is easy.
- Configuration is possible via LAN by LNX SETTING TOOL
- Possible power supply from the LAN cable by PoE function
- Reliable industrial grade design
- ESD and surge protection
- Housing material: Plastic
- DIN rail, magnet, and screw mountable (Attachment is required)
- Includes a microSD card (with USB adapter)
- Includes an AC adapter
- RoHS and CE compliant (except for PoE function)
- MADE IN JAPAN
Connection example
[LNX-003M Slave Mode]
[LNX-003M Master Mode]
Modbus RTU/ASCII master device can communicate with remote Modbus TCP slave device via Ethernet
[Tunneling mode between two LNX-003M]
Direct communication between the two LNX-003M without PCs offers you to connect separated a RS-485 networks. By using cross cable, one to one connection is also available.
Specification
Item | Description | Remarks |
---|---|---|
Model | LNX-003M/LNX-003Me | |
Power | 5VDC Supplied by AC adapter or by LAN connector (PoE function) (LNX-003Me is not supported the PoE function) |
PoE function supports both mode A and B |
Current Consumption | Less than 350 mA | |
Network Interface | IEEE802.3(10Base-T) IEEE802.3u(100Base-TX) half-duplex / full-duplex (auto detected) |
|
LAN Connector | RJ45 | ESD protection Isolation over 1500VDC |
Protocol | Modbus TCP | |
Interface | RS-485 Half Duplex Communication (2 wire) isolated from inner circuit (DC3000V) |
ESD protection |
Connector | 5 position Terminal Block (PHOENIX CONTACT) |
5.08mm pitch |
Memory Card | microSD card | For configuration |
Baud Rate | 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps | |
Data Bits | 7 or 8 bits | |
Stop Bits | 1 or 2 bits | |
Parity | Even, Odd, No parity | |
Mode | Modbus RTU Master/Slave Modbus ASCII Master/Slave |
|
Number of connectable devices (Slave Mode) | Up to 8 Modbus TCP masters can be connected simultaneously | |
Slave address - IP address table (Master Mode) | Up to 8 IP addresses can be registered for each slave address (ID) range | |
LED | POW: Power LED RX: Reception LED TX: Transmission LED SYS: System Status LED LINK (RJ45 Connector): LINK Status ACT (RJ45 Connector): ACT Status |
|
Operating Ambient Temperature | -10 to +55 °C | No condensation permitted |
Operating Ambient Humidity | 30 to 85 % RH | No condensation permitted |
Storage Ambient Temperature | -20 to +60 °C | No condensation permitted |
Storage Ambient Humidity | 30 to 85 % RH | No condensation permitted |
CE Compliant | EMS:EN61000-6-2 - IEC61000-4-2 Electrostatic discharge requirements - IEC61000-4-3 Radiated electromagnetic field requirements - IEC61000-4-4 Electrical fast transient burst requirements - IEC61000-4-5 Surge immunity test requirements - IEC61000-4-6 Conducted radio frequency requirements EMI:EN61000-6-4 - EN61000-6-4(2007)+A1(2011) Radiated Emissions - EN61000-6-4(2007)+A1(2011) Conducted Emissions |
This product has applied the common standard for industrial environment EN61000-6-2 and EN61000-6-4 (except for PoE function) |
Weight | Approx. 120 [g] | Only main body |
Dimensions | 69 x 82.5 x 30 [mm] (2.638" x 3.248" x 1.181") |
Without projections |
Interface Termianl (RS485 PIN ASSIGNMENT)
Pin No | Signal | Direction | Notes |
---|---|---|---|
1 |
A (+) |
I/O | RS485 Data + |
2 |
B (-) |
I/O | RS485 Data - |
3 | GND | - | Signal ground |
4 | A (+) | I/O | RS485 Data + |
5 | B (-) | I/O | RS485 Data - |
LNX SETTING TOOL
This application makes configured data of the LNX series.
After saving the configuration data to the microSD, and insert the product it.
It will be automatically set by turning on the power of LNX-003M.
Then backup file is made to microSD card automatically.
Package Contents
- LNX-003M or LNX-003Me
- microSD card (with USB adapter)
- AC adapter
- Driver & Application CD
Documentation
Price and Optional Accessories
Description | MODEL | Image | List Price (JPY) | Stock Status |
---|---|---|---|---|
RS-485 LAN Converter for Modbus Rev2 |
LNX-003M | |||
RS-485 LAN Converter for Modbus economy type Rev2 |
LNX-003Me | Not supported PoE function |
||
Attachment with clamping screw |
PEN-003 | |||
Attachment for 35mm DIN rail |
PEN-003-DIN | |||
Attachment with neodymium magnet |
PEN-003-MG | |||
5P Terminal to RJ45 Convert Adapter |
ACC-005 | |||
Detachable 5P Terminal Connector 1757048 (Phoenix) (Additional purchase) |
TB-USB-5 |
Ordering
[LNX-205] LAN Multiplexer 2:1 x 2CH HuMANDATA LTD.
[LNX-205] LAN Multiplexer 2:1 x 2CH
Enable to switch multi ports from a distant place via
Ethernet or an external contact point.
Overview
LNX-205 is a LAN multiplexer to switch 2 LAN ports of 2 individual channels. LNX-205 can change the port by three ways: send simple command from PC via LAN, input control signal from an external contact point or change switches of the product body. This is very useful to switch external network to internal network, and to connect with the network only when required.It can promote labor-saving for inspection process and auto-inspection system of LAN devices.
Second and subsequent images are CG models
Features
- Switch Ethernet wires by multiplexer IC
no need to insert and pull out the cable - Switch a port from a distance via Ethernet and or an external contact point
Swich a port via a virtual COM port is also available by using our original application, LNX-VCP - Switch a port manually by changing switch of the product body
- Because unconnected port is not connected, it's possible to use it as a simple firewall
- Easy configuration by microSD
- Easy to restore the setting data at the time of replacement
- Easy to send the setting data by e-mail
- No restriction for IP address setting, out of the network segment
- Easy to backup the setting data
- Configuration via Ethernet is also available by using original setting tool
- Power for the main body supports PoE, powered via LAN cable
switching port does not support PoE - AC adapter is included in the package
- FG terminal is equipped
- All LAN ports are protected from ESD
- Non-use of 10 Restricted substances of RoHS directive
- MADE IN JAPAN
Connection Examples
Change common port LAN or external network to LAN1 or LAN2. Channel A and B is independent from each other.
SPECIFICATION
Item | Description | Remarks |
---|---|---|
model | LNX-205 | |
Power | 5VDC, Supplied by AC adapter or LAN connector (PoE function) |
|
Current Consumption | Less than 300mA | |
Network Interface | IEEE802.3 (10Base-T) IEEE802.3u (100Base-TX) half-duplex / full-duplex (auto detected) |
|
Common/Selecting Port | 10/100/1000 Base-T | (*1) |
LAN Connector | RJ45 x 7 |
ESD protection ±11KV |
Protocol | TCP / UDP / Telnet | |
RS-232C Connector | D-Sub 9pin Male (#4-40 UNC screws are mounted) |
M2.6 screws are also attached for accessary |
Setting Memory Card | microSD card | For save and restore the product setting SPI mode |
LED | Power LED Connection LED x 4 System LED micro SD card access LED LINK Status LED (RJ45 Connector) ACT Status LED (RJ45 Connector) |
|
Operating Ambient Temperature | -20 to 60 [°C] (-4 to 140 [°F]) | No condensation permitted |
Operating Ambient Humidity | 10 to 85 %RH | No condensation permitted |
Storage Ambient Temperature | -20 to 60 [°C] (-4 to 140 [°F]) | No condensation permitted |
Storage Ambient Humidity | 10 to 85 % RH | No condensation permitted |
Weight | Approx. 250 [g] | Only main body |
Dimensions | 165 x 80.5 x 39 [mm] (6.496" x 3.169" x 1.535") |
Without projections |
(*1) The operation of this product is confirmed with 10/100/100 BASE-T. But the product is inserted between LAN cables, speed reduction can be occurred. The communication speed is not guaranteed.
When the LAN cable is long, using giga bit corresponding switching hub may improve the speed reduction.
Pin Assignment of External Contact Connector
D-sub 9 pin male connector
#4-40 UNC screws are mounted by factory setting. You can change them to attached M2.6 screws.
Pin No | Name | Direction | Remarks |
---|---|---|---|
1 | LAN A1 | IN | Select LAN A1 |
2 | LAN A2 | IN | Select LAN A2 |
3 | LAN B1 | IN | Select LAN B1 |
4 | LAN B2 | IN | Select LAN B2 |
5 | GND | - | GND |
6 | NC | - | - |
7 | (COM A) | - | CH-A Power Input (option) |
8 | NC | - | - |
9 | (COM B) | - | CH-B Power Input (option) |
CASE | FG | - | Connect with FG Terminal |
LNX Setting Tool
Using this application, you can easily to make a configuration data of the LNX series.
After saving the configuration data to the microSD card, please insert it to the product. Then the setting data, WR_DATA.TXT, will be read automatically when the product is powered on. At that time, the read data is backup in the microSD card as RD_DATA.TXT.
The setting data is stored in the product. No need to indsert the microSD card next time.
When replacing LNX series, just insert the same microSD card then you could restore the same setting.
When your PC is in the same segment as LNX series, you can also control the setting via ethernet.
PACKAGE CONTENTS
- LNX-205
- microSD card (with USB adapter)
- AC adapter
- Driver & Application CD
DOCUMENTATION
Price and Optional Accessories
Description | MODEL | Image | List Price (JPY) | Stock Status |
---|---|---|---|---|
LAN Multiplexer 2:1 x 2CH |
LNX-205 | |||
Attachment for vertical direction |
ACC-027 | |||
Attachment for horizontal direction |
ACC-028 | |||
Attachment for DIN rail type B |
ACC-031 | |||
Neodymium magnet set |
ACC-036 |
RELATED PRODUCT
Ordering
[LNX-204] LAN Multiplexer 4:1 HuMANDATA LTD.
[LNX-204] LAN Multiplexer 4:1
Enable to switch multi ports from a distant place via
Ethernet or an external contact point.
Overview
LNX-204 is a LAN multiplexer to switch 4 channel LAN ports. LNX-204 can change the port by three ways: send simple command from PC via LAN, input control signal from an external contact point or change switches of the product body. This is very useful to switch external network to internal network, and to connect with the network only when required.
It can promote labor-saving for inspection process and auto-inspection system of LAN devices.
Second and subsequent images are CG models
Features
- Switch Ethernet wires by multiplexer IC
no need to insert and pull out the cable - Switch a port from a distance via Ethernet and or an external contact point
Swich a port via a virtual COM port is also available by using our original application, LNX-VCP - Switch a port manually by changing switch of the product body
- Because unconnected port is not connected, it's possible to use it as a simple firewall
- Easy configuration by microSD
- Easy to restore the setting data at the time of replacement
- Easy to send the setting data by e-mail
- No restriction for IP address setting, out of the network segment
- Easy to backup the setting data
- Configuration via Ethernet is also available by using original setting tool
- Power for the main body supports PoE, powered via LAN cable
switching port does not support PoE - AC adapter is included in the package
- FG terminal is equipped
- All LAN ports are protected from ESD
- Non-use of 10 Restricted substances of RoHS directive
- MADE IN JAPAN
Connection Examples
Change common port LAN or external network to LAN1-4
SPECIFICATION
Item | Description | Remarks |
---|---|---|
model | LNX-204 | |
Power | 5VDC, Supplied by AC adapter or LAN connector (PoE function) |
|
Current Consumption | Less than 300mA | |
Network Interface | IEEE802.3 (10Base-T) IEEE802.3u (100Base-TX) half-duplex / full-duplex (auto detected) |
|
Common/Selecting Port | 10/100/1000 Base-T | (*1) |
LAN Connector | RJ45 x 6 |
ESD protection ±11KV |
Protocol | TCP / UDP / Telnet | |
RS-232C Connector | D-Sub 9pin Male (#4-40 UNC screws are mounted) |
M2.6 screws are also attached for accessary |
Setting Memory Card | microSD card | For save and restore the product setting SPI mode |
LED | Power LED Connection LED x 4 System LED micro SD card access LED LINK Status LED (RJ45 Connector) ACT Status LED (RJ45 Connector) |
|
Operating Ambient Temperature | -20 to 60 [°C] (-4 to 140 [°F]) | No condensation permitted |
Operating Ambient Humidity | 10 to 85 %RH | No condensation permitted |
Storage Ambient Temperature | -20 to 60 [°C] (-4 to 140 [°F]) | No condensation permitted |
Storage Ambient Humidity | 10 to 85 % RH | No condensation permitted |
Weight | Approx. 250 [g] | Only main body |
Dimensions | 165 x 80.5 x 39 [mm] (6.496" x 3.169" x 1.535") |
Without projections |
(*1) The operation of this product is confirmed with 10/100/100 BASE-T. But the product is inserted between LAN cables, speed reduction can be occurred. The communication speed is not guaranteed.
When the LAN cable is long, using giga bit corresponding switching hub may improve the speed reduction.
Pin Assignment of External Contact Connector
D-sub 9 pin male connector
#4-40 UNC screws are mounted by factory setting. You can change them to attached M2.6 screws.
Pin No | Name | Direction | Remarks |
---|---|---|---|
1 | SEL 1 | IN | Select LAN1 |
2 | SEL 2 | IN | Select LAN2 |
3 | SEL 3 | IN | Select LAN3 |
4 | SEL 4 | IN | Select LAN4 |
5 | GND | - | GND |
6 | NC | - | - |
7 | NC | - | - |
8 | NC | - | - |
9 | (COM) | - | Power Input (option) |
CASE | FG | - | Connect with FG Terminal |
LNX Setting Tool
Using this application, you can easily to make a configuration data of the LNX series.
After saving the configuration data to the microSD card, please insert it to the product. Then the setting data, WR_DATA.TXT, will be read automatically when the product is powered on. At that time, the read data is backup in the microSD card as RD_DATA.TXT.
The setting data is stored in the product. No need to indsert the microSD card next time.
When replacing LNX series, just insert the same microSD card then you could restore the same setting.
When your PC is in the same segment as LNX series, you can also control the setting via ethernet.
PACKAGE CONTENTS
- LNX-204
- microSD card (with USB adapter)
- AC adapter
- Driver & Application CD
DOCUMENTATION
Price and Optional Accessories
Description | MODEL | Image | List Price (JPY) | Stock Status |
---|---|---|---|---|
LAN Multiplexer 4:1 |
LNX-204 | |||
Attachment for vertical direction |
ACC-027 | |||
Attachment for horizontal direction |
ACC-028 | |||
Attachment for DIN rail type B |
ACC-031 | |||
Neodymium magnet set |
ACC-036 |
RELATED PRODUCT
Ordering
[LNX-007L] LAN Isolator (Compact) HuMANDATA LTD.
[LNX-007L] LAN Isolator (Compact)
High pressure and isolates 4000V, ESD protection
LAN Isolatpor (Compact)
Overview
LNX-007L is a compact LAN isolator which withstands high pressure and isolates between devices and network. Improvement of noise tolerance and protection of devices are expected by insulating.
Features
- 4000V isolation
-
Supports 1000BASE-T, 100BASE-TX, 10BASE-T
*PoE power supply is not supported. - FG terminals on the network side and the equipment side
- Built-in common mode filter for radiation noises
- ESD protection (Equipment side)
- No power supply required
- Housing material: Plastic
- DIN rail, magnet, and screw mountable(Attachment is required)
- Non-use of 10 Restricted substances of RoHS directive
- MADE IN JAPAN
Connection example
- *PoE power supply is not supported.
- *Please use a LAN cable having the performance of over category 5e which supports 1000BASE-T, 100BASE-TX, 10BASE-T.
Specification
Item | Description | Remarks |
---|---|---|
Model | LNX-007L | |
Power; | Not needed | |
Network Interface | 1000BASE-T, 100BASE-TX, 10BASE-T | PoE is not supported |
LAN Connector | RJ45 x 2 |
ESD protection (Equipment Side) |
Isolation Protection | 4000V | Designed value |
Supports OS | OS-Independent (Not drivers required) | |
Operating Ambient Temperature | -20 to +60 °C | No condensation permitted |
Operating Ambient Humidity | 30 to 85 % RH | |
Storage Ambient Temperature | -20 to +60 °C | |
Storage Ambient Humidity | 30 to 85 % RH | |
Noise Tolerance | IEC61000-4-5 Serge Immunity |
Internal isolation transmitter is based on IEC60950-1, IEC60601-1;2006 |
Weight | Approx. 50 [g] | Only main body |
Dimensions |
67 x 43.5 x 27 [mm] (2.638" x 1.713" x 1.063") |
Without projections |
Package Contents
- LNX-007L
Description | MODEL | Image | List Price (JPY) | Stock Status |
---|---|---|---|---|
LAN Isolator (Compact) | LNX-007L | |||
Attachment with clamping screw | PEN-003 | |||
Attachment for 35mm DIN rail |
PEN-003-DIN | |||
Attachment with neodymium magnet |
PEN-003-MG |