Multiplexer
[USB-208] USB Multiplexer 4:1 - USB Switching Device HuMANDATA LTD.
[USB-208] USB Analog Multiplexer 4:1 Under development
Analog multiplexer with 4 switchable channels
Switch RS-232C, RS-422/485 signals by USB, external input or manual switch
Overview
USB-208 is a multiplexer that can switch one common port to one of four channels.
RS-232C, RS-422/485, and other analog signals can be switched by the following three ways.
- Sending simple commands from a PC via USB
- External input, no-voltage contact input or DC input can be selected
- Switching manual switch on the main body
It supports analog signal voltage range of ±25V and data rate up to 20Mbps.
The system can also be used to save labor in the inspection process.
It allows four units in a single setting during automatic equipment inspection.
Features
- 4 channel analog signals, RS-232C, RS-422/485 and others, can be switchd automatically
- Supports analog signal up to ±25V
- Supports max. 20Mbps
- Switch by sending simple commands from a PC via USB
You can use our free Application or general purpose terminal software such as TeraTerm. - Switch by External input
no-voltage dry contact input or 5 to 24V DC input - Manual switching by using the switch on the main body of the unit
- Controllable from embedded Linux devices
It operates as a device of the standard CDC-ACM class.
For Linux distributions with embedded CDC-ACM device drivers, you can use them without installing the drivers.
We do not support the use of Linux itself. - Uses high-retention industrial grade USB connector
- USB line has ESD protection
- Includes a USB A-B cable (1.8m)
- Includes an AC adapter
- Non-use of 10 Restricted substances of RoHS directive
- MADE IN JAPAN
Pinouts and Wiring between COMMON and each channel
CONNECTION EXAMPLE
[Switching RS-232C equipment via USB]
[Switching RS-485/422 signal by external switch box]
Specification
Item | Description | Remarks |
---|---|---|
Model | USB-208 | |
Input Power | 5VDC, less than 150mA Supplied through a USB port (Bus-powered) or AC adapter |
|
Number of Switching Port | 4 | |
Analog Signal Range | ±25V | |
Analog Signal Data Rate | max. 20Mbps | |
LSI | MAX14778 analog multiplexer | ADI |
Common Port | D-SUB 9pin Male (#4-40 UNC) |
M2.6 screws are also included in the package |
Switching Port | D-SUB 9pin Male x 4 (#4-40 UNC) |
|
Control Port | USB2.0 B connector Virtual COM Port |
ESD protection |
Support OS for controller side | Windows 11/10/8.1/8/7 | CDC driver OS of common/switching ports are not limited |
External Input Connector | D-SUB 9pin Male connector (#4-40 UNC) |
M2.6 screws are also included in the package |
External Input Specification | No-Voltage Dry Contact Input | Switch setting: VCC side |
Photocoupler Isolated Input input: DC5~24V input impedance: 2.8KΩ OFF to ON Voltage: more than 4.3V ON to OFF Voltage: up to 3.6V minimum OFF-state Current: 0.9mA |
Switch setting: COM side | |
LED | Power LED Channel LED x 4 |
|
Operating Ambient Temperature | -20 to 60[°C] (-4 to 140 [°F]) | No condensation permitted |
Operating Ambient Humidity | 10 to 85%RH | No condensation permitted |
Storage Ambient Temperature | -20 to 60[°C] (-4 to 140 [°F]) | No condensation permitted |
Storage Ambient Humidity | 10 to 85%RH | No condensation permitted |
Dimensions | 165 x 80.5 x 39 [mm] (6.496" x 3.169" x 1.535") |
Without projections |
Weight | Approx. 350 [g] |
* suspend, standby and other power saving function is not supported.
Package Contents
- USB-208
- USB A-B cable 1.8m
- AC adapter
- Screw Lock M2.6 D-sub Connectors (#4-40 UNC Connectors are mounted by default)
Documentation
- User's manual, Outline Drawing, etc
- Original free application, AMUX-Select, is available
Price and Optional Accessories
Description | MODEL | Image | List Price (JPY) | Stock Status |
---|---|---|---|---|
USB Analog Multiplexer 4:1 |
USB-208 | |||
Attachment for vertical direction |
ACC-027 | |||
Attachment for horizontal direction |
ACC-028 | |||
Attachment for DIN rail type B |
ACC-031 | |||
Neodymium magnet set |
ACC-036 |
Ordering
[USB-404] USB Multiplexer 8:1 - USB Switching Device HuMANDATA LTD.
[USB-404] USB Analog Multiplexer 8:1 Under development
Analog multiplexer with 8 switchable channels
Switch RS-232C, RS-422/485 signals by USB, external input or manual switch
Overview
USB-404 is a multiplexer that can switch one common port to one of eight channels.
RS-232C, RS-422/485, and other analog signals can be switched by the following three ways.
- Sending simple commands from a PC via USB
- External input, no-voltage contact input or DC input can be selected
- Switching manual switch on the main body
It supports analog signal voltage range of ±25V and data rate up to 20Mbps.
The system can also be used to save labor in the inspection process.
It allows eight units in a single setting during automatic equipment inspection.
Features
- 8 channel analog signals, RS-232C, RS-422/485 and others, can be switchd automatically
- Supports analog signal up to ±25V
- Supports max. 20Mbps
- Switch by sending simple commands from a PC via USB
You can use our free Application or general purpose terminal software such as TeraTerm. - Switch by External input
no-voltage dry contact input or 5 to 24V DC input - Manual switching by using the switch on the main body of the unit
- Controllable from embedded Linux devices
It operates as a device of the standard CDC-ACM class.
For Linux distributions with embedded CDC-ACM device drivers, you can use them without installing the drivers.
We do not support the use of Linux itself. - Uses high-retention industrial grade USB connector
- USB line has ESD protection
- Includes a USB A-B cable (1.8m)
- Includes an AC adapter
- Non-use of 10 Restricted substances of RoHS directive
- MADE IN JAPAN
Pinouts and Wiring between COMMON port and each channels
CONNECTION EXAMPLE
[Switching RS-232C equipment via USB]
[Switching RS-485/422 signal by external switch box]
Specification
Item | Description | Remarks |
---|---|---|
Model | USB-404 | |
Input Power | 5VDC, less than 150mA Supplied through a USB port (Bus-powered) or AC adapter |
Supplied by AC adapter |
Number of Switching Port | 8 | |
Analog Signal Range | ±25V | |
Analog Signal Data Rate | max. 20Mbps | |
LSI | MAX14778 analog multiplexer | ADI |
Common Port | D-SUB 9pin Male (#4-40 UNC) |
M2.6 screws are also included in the package |
Switching Port | D-SUB 9pin Male x 8 (#4-40 UNC) |
|
Control Port | USB B connector Virtual COM Port |
ESD protection |
Support OS for controller side | Windows 10/8.1/8/7/Vista/XP | CDC driver OS of switch side USB port is not limited |
External Input Connector | D-SUB 9pin Male connector (#4-40 UNC) |
M2.6 screws are also included in the package |
External Input Specification | No-Voltage Dry Contact Input | Switch setting: VCC side |
Photocoupler Isolated Input input: DC5~24V input impedance: 2.8KΩ OFF to ON Voltage: more than 4.3V ON to OFF Voltage: up to 3.6V minimum OFF-state Current: less than 0.9mA |
Switch setting: COM side | |
LED | Power LED Channel LED x 8 |
|
Operating Ambient Temperature | -20 to 60[°C] (-4 to 140 [°F]) | No condensation permitted |
Operating Ambient Humidity | 10 to 85%RH | No condensation permitted |
Storage Ambient Temperature | -20 to 60[°C] (-4 to 140 [°F]) | No condensation permitted |
Storage Ambient Humidity | 10 to 85%RH | No condensation permitted |
Dimensions | 166 x 82 x 50 [mm] (6.535" x 3.228" x 1.969") |
Without projections |
Weight | Approx. 400 [g] |
* suspend, standby and other power saving function is not supported.
Package Contents
- USB-404
- USB A-B cable 1.8m
- AC adapter
- Screw Lock M2.6 D-sub Connectors (#4-40 UNC Connectors are mounted by default)
Documentation
- User's manual, Outline Drawing, etc
- Original free application, AMUX-Select, is available
Price and Optional Accessories
Description | MODEL | Image | List Price (JPY) | Stock Status |
---|---|---|---|---|
USB Multiplexer 8:1 |
USB-404 | |||
Attachment for horizontal direction |
ACC-028 | |||
Attachment for DIN rail type B |
ACC-031 | |||
Neodymium magnet set |
ACC-036 |
Ordering
[USB-205] Support for USB 3.0 USB Multiplexer 4:1 - USB Switching Device HuMANDATA LTD.
[USB-205] Support for USB 3.0 USB Multiplexer 4:1 - USB Switching Device
4:1 USB Mux Supports for USB 3.0
for Extremely Fast Switching From PC
Overview
USB-205 is a USB 3.0 SuperSpeed (5Gbps) compliant 4 port USB multiplexer. Connect to USB port for control and transmitting a simple command from your PC, 4 port USB can be arbitrarily switch. It can promote labor-saving for testing process and auto-testing system of USB devices.
* Switching USB 3.0 port is the same as removing and re-mounting USB device. When you switch USB 3.0 port, it is necessary to confirm removing and recognizing the device by your application.
Application examples
- Operation test of USB devices
- Switching USB devices
Features
- Switch 4 USB ports
You can switch 4-channel USB 3.0 port from controller USB 3.0 port by using virtual COM port. - Supports High Speed (480Mbps), SuperSpeed (5Gbps), High Speed (480Mbps), Full Speed (12Mbps) and Low Speed (1.5Mbps)
- Simple Current Mesurement Function
USB-205 can measure current consumption of USB device. (The measurement value is digital value and it's not calibrated.) - Simple Command
You can operate with simple single character command - Controllable from embedded Linux devices
It operates as a device of the standard CDC-ACM class.
For Linux distributions with embedded CDC-ACM device drivers, you can use them without installing the drivers.
We do not support the use of Linux itself. - Housing material: Plastic
- DIN rail and screw mountable(Attachment is required)
- Includes a USB 3.0 A-B cable (1.0m)
- Includes a USB A-miniB cable (1.0m)
- Includes an AC adapter
- Non-use of 10 Restricted substances of RoHS directive
- MADE IN JAPAN
Specification
Item | Description | Remarks |
---|---|---|
Model | USB-205 | |
Input Power | 5VDC | Supplied by AC adapter |
Common USB port | USB B Connector | USB3.0 SuperSpeed USB 2.0 Hi, Full and Low Speed ESD protection |
Switch side USB port | USB A Connector | USB3.0 SuperSpeed, USB 2.0 Hi, Full and Low Speed ESD protection |
Controller side USB port | USB mini-B Connector | USB 2.0 Full Speed ESD protection |
Control Method | Virtual COM port | Setting baud rate and other conditions is not necessary. |
Support OS for controller side | Windows 10/8.1/8/7/Vista/XP | CDC driver OS of switch side USB port is not limited |
Status LED | Power / Error x 1 Select display x 4 |
Bi-color LED |
Operating Ambient Temperature | -10 to 60℃ (14 to 140 [°F]) | No condensation permitted |
Operating Ambient Humidity | 30 to 85%RH | No condensation permitted |
Storage Ambient Temperature | -10 to 60℃ (14 to 140 [°F]) | No condensation permitted |
Storage Ambient Humidity | 30 to 85%RH | No condensation permitted |
Dimensions | 165 x 80.5 x 39 [mm] (6.496" x 3.169" x 1.535") |
Without projections |
Weight | Approx. 250 [g] | Only main body |
* suspend, standby and other power saving function is not supported.
Package Contents
- USB-205
- USB 3.0 A-B cable 1.0m
- USB A-miniB cable 1.0m
- AC adapter
- Driver & Application CD
Documentation
[USB-206] USB 3.0 Host Multiplexer HuMANDATA LTD.
[USB-206] USB 3.0 Host Multiplexer
USB-206 is an active USB 3.0 multiplexer. It switches between two host PCs for one device.
Overview
USB-206 can multiplex USB 3.0 signal of two host PCs and connect it to a USB 3.0 device.
USB-206 can be controlled by specific USB ports and the physical switch.
Application examples
- Share a USB printer
- Share a USB strage
- Exchange data between the host PCs relaying a USB strage
- Control power of the device
Features
- USB3.0 SuperSpeed compatible.
USB 2.0 High, Full and Low Speed device is also compatible. - One or two PCs are possible to participate to control host switching.
Third person, which will not be a host of the device, also can be a controller. - Easy to control by a terminal software from control ports.
All commands are assigned to ascii charactors. - Phisical switch is a vailable.
It switches the hosts without any software controller. - Power control for the device.
Turn ON/OFF by a command. - Device over current detection.
It detects the over current condition of the device and automatically shut it down. - Dip switches for the power-on condition.
- Controllable from embedded Linux devices
It operates as a device of the standard CDC-ACM class.
For Linux distributions with embedded CDC-ACM device drivers, you can use them without installing the drivers.
We do not support the use of Linux itself. - Includes a USB 3.0 A-B cable (1.0m) x2
- Includes a USB 2.0 A-B cable (1.8m) x2
- Includes an AC adapter
- Non-use of 10 Restricted substances of RoHS directive
- MADE IN JAPAN
Specification
Item | Description | Remarks |
---|---|---|
Model | USB-206 | |
Input Power | 5V DC | Supplied by AC adapter |
Power Consumption | About 200mA | without host/device/control connections |
OS limitation for hosts | none | |
OS limitation for controllers | Windows 10/8.1/8/7/Vista/XP | CDC driver |
USB Connector of host | USB3.0 Standard B x2 | ESD protection |
USB Connector of device | USB3.0 Standard A x1 | ESD protection |
USB Connector of control | USB2.0 Standard B x2 | ESD protection |
Contorol method | Serial communication via virtual COM port | Baudrate is fixed at 9600bps Hardware flow control is recommended |
Status LED | Power LED Device status LED Host status LED x2 |
|
Operating Ambient Temperature | 0 to 60 ℃ (32 to 140 [°F]) | No condensation permitted |
Operating Ambient Humidity | 30 to 85%RH | No condensation permitted |
Storage Ambient Temperature | 0 to 60 ℃ (32 to 140 [°F]) | No condensation permitted |
Storage Ambient Humidity | 30 to 85%RH | No condensation permitted |
Dimensions | 165 x 80.5 x 39 [mm] (6.496" x 3.169" x 1.535") |
Without projections |
Weight | Approx. 280 [g] | Only main body |
* suspend, standby and other power saving function is not supported.
Package Contents
- USB-206
- USB 3.0 A-B cable 1.0m x2
- USB 2.0 A-B cable 1.8m x2
- AC adapter
- Driver & Application CD
[USB-201] USB Multiplexer 8:1 - USB Switching Device HuMANDATA LTD.
[USB-201] USB Multiplexer 8:1 - USB Switching Device
8:1 USB Mux Supports USB 2.0 Hi Speed Data Rates
for Extremely Fast Switching From PC
Overview
USB-201 is a USB 2.0 High Speed(480Mbps), Full Speed(12Mbps) and Low Speed(1.5Mbps) compliant 8 port USB multiplexer. Connect to USB port for control and transmitting a simple command from your PC, 8 port USB can be arbitrarily switch. It can promote labor-saving for testing process and auto-testing system of USB devices.
* Switching USB 2.0 port is the same as removing and re-mounting USB device. When you switch USB 2.0 port, it is necessary to confirm removing and recognizing the device by your application.
Application examples
- Operation test of USB devices
- Switching USB devices
Features
- Switch 8 Ports
You can switch 8-channel USB 2.0 port from controller USB 2.0 port by using virtual COM port. - Supports USB 2.0 Hi Speed
USB-201 is designed for USB 2.0 High, Full and Low Speed applications with capability of supporting data rates up to 480Mbps. - Simple Current Mesurement Function
USB-201 can measure current consumption of USB device. (The measurement value is digital value and it's not calibrated.) - Simple Command
You can operate with simple single character command - Controllable from embedded Linux devices
It operates as a device of the standard CDC-ACM class.
For Linux distributions with embedded CDC-ACM device drivers, you can use them without installing the drivers.
We do not support the use of Linux itself. - Housing material: Plastic
- DIN rail and screw mountable (Attachment is required)
- Includes a USB A-B cable (1.8m)
- Includes a USB A-miniB cable (1.0m)
- Includes an AC adapter
- Non-use of 10 Restricted substances of RoHS directive
- MADE IN JAPAN
Specification
Item | Description | Remarks |
---|---|---|
Model | USB-201 | |
Input Power | 5VDC | Supplied by AC adapter |
Common USB port | USB B connector | USB 2.0 Hi Speed ESD protection |
Switch side USB port | USB A connector | USB 2.0 Hi Speed x 8ch ESD protection |
Controller side USB port | USB mini-B connector | USB 2.0 Full Speed ESD protection |
Control Method | Virtual COM port | Setting baud rate and other conditions is not necessary. |
Support OS for controller side | Windows 10/8.1/8/7/Vista/XP | CDC driver OS of switch side USB port is not limited |
LED | Power / Error x 1 Select display x 8 |
Bi-color LED |
Key Device | MAX4999 USB2.0 multiplexer | Maxim Integrated |
Operating Ambient Temperature | -10 to 60℃ (14 to 140 [°F]) | No condensation permitted |
Operating Ambient Humidity | 30 to 85%RH | No condensation permitted |
Storage Ambient Temperature | -10 to 60℃ (14 to 140 [°F]) | No condensation permitted |
Storage Ambient Humidity | 30 to 85%RH | No condensation permitted |
Dimensions | 165 x 80.5 x 39 [mm] (6.496" x 3.169" x 1.535") |
Without projections |
Weight | Approx. 230 [g] |
* suspend, standby and other power saving function is not supported.
Package Contents
- USB-201
- USB A-B cable 1.8m
- USB A-miniB cable 1.0m
- AC adapter
- Driver & Application CD
Price and Optional Accessories
Description | MODEL | Image | List Price (JPY) | Stock Status |
---|---|---|---|---|
USB Multiplexer 8:1 |
USB-201 | |||
Attachment for vertical direction |
ACC-027 | |||
Attachment for horizontal direction |
ACC-028 | |||
Attachment for DIN rail type B |
ACC-031 | |||
Neodymium magnet set |
ACC-036 |
Ordering