Isolator
[USB-53G1] USB3.0/3.1 Gen1 Isolator Compact HuMANDATA LTD.
[USB-53G1] USB3.0/3.1 Gen1 Isolator Compact
Improved reliability is protected from the noise by an isolated.
Super Speed (5Gbps) compliant
Overview
USB-53G1 is a USB 3.0/3.1 Gen1 Super Speed (5Gbps) compliant isolator which isolates between a USB host and a USB peripheral device with 4000VDC.
With USB-53G1, it can be expected to eliminate ground loops that can cause measurement errors and equipment from surges, common-mode voltage, static discharge, magnetic fields, and radio frequency interference.There is no need to install any drivers. It works with every operating system such as Windows, Linux, Mac OS X. USB-03G1まま
Upcoming Product
Second and subsequent images are CG models
Features
-
USB3.0/3.1 Gen1 Super Speed (5Gbps), USB2.0 Full (12Mbps) Speed compliant
* USB 2.0 High Speed (480 Mbps) and Low Speed (1.5Mbps) are not supported.
USB-029H2-RP is compatible with USB 2.0 High Speed (480Mbps). - USB host connector which is standard Type B female and have to be connected to a PC or other USB host device
- USB target connector which is standard Type A female and have to be connected to a USB peripheral device
- OS-Independent (No drivers required)
- USB-53G1 is powered through a USB port (Bus-powered)
- 4000VDC bus isolation
- ESD and surge protection
- Built-in common mode filter for radiation noises
- Housing material: Plastic
- DIN rail, magnet, and screw mountable(Attachment is required)
- Includes a USB3.0 A-B cable 200 [mm]
- Non-use of 10 Restricted substances of RoHS directive
- MADE IN JAPAN
Specification
Item | Description | Remarks |
---|---|---|
Model | USB-53G1 | |
Input Power |
5VDC Supplied through a USB port (Bus-powered) |
|
Current Consumption | Less than 100mA + current of the target device |
ターゲット側で400mA供給可能 *1: ホスト側能力以内であること *2: 内部DC/DCの効率により ホスト側には ターゲット側より多くの電流が流れます |
HOST Interface |
USB 3.0/3.1 Gen1 Supports Super (5Gbps) USB 2.0 Full (12Mbps) |
USB 1.1 compatible ESD protection |
Isolation Protection | 4000VDC | Designed value |
Support OS | OS-Independent (No drivers required) | |
LED |
PWR: Power LED TG PW: Target power LED |
|
Operating Ambient Temperature | -20 to 60℃ ( -4 to 140 [°F] ) | No condensation permitted |
Operating Ambient Humidity | 30 to 85%RH | No condensation permitted |
Storage Ambient Temperature | -20 to 60℃ ( -4 to 140 [°F] ) | No condensation permitted |
Storage Ambient Humidity | 30 to 85%RH | No condensation permitted |
Noise Tolerance | Not defined | |
Transmission and other Standard | Not defined | |
Weight | Approx. 50 [g] | Only main body |
Dimensions |
67 x 43.5 x 27 [mm] (2.638" x 1.713" x 1.063") |
Without projections |
Package Contents
- USB-53G1
- USB3.0 A-B cable 200 [mm]
Documentation
Price and Optional Accessories
Description | MODEL | Image | List Price (JPY) | Stock Status |
---|---|---|---|---|
USB3.0/3.1 Gen1 Isolator | USB-53G1 | |||
Attachment with clamping screw | PEN-003 | |||
Attachment for 35mm DIN rail |
PEN-003-DIN | |||
Attachment with neodymium magnet |
PEN-003-MG |
Ordering
[USB-03G1] USB3.0/3.1 Gen1 Isolator HuMANDATA LTD.
[USB-03G1] USB3.0/3.1 Gen1 Isolator
Improved reliability is protected from the noise by an isolated.
Super Speed (5Gbps) compliant
Overview
USB-03G1 is a USB 3.0/3.1 Gen1 Super Speed (5Gbps), Full Speed (12Mbps) and Low Speed (1.5Mbps) compliant isolator which isolates between a USB host and a USB peripheral device with 4000VDC.
With USB-03G1, it can be expected to eliminate ground loops that can cause measurement errors and equipment from surges, common-mode voltage, static discharge, magnetic fields, and radio frequency interference.There is no need to install any drivers. It works with every operating system such as Windows, Linux, Mac OS X.
Second and subsequent images are CG models
Features
- USB3.0/3.1 Gen1 Super Speed (5Gbps), USB2.0 Full (12Mbps) /Low (1.5Mbps) Speed compliant
* USB 2.0 High Speed (480 Mbps) is not supported. USB-029H2-RP is compatible with USB 2.0 High Speed (480Mbps).
* It is necessary to change the internal settings at Low Speed. (automatic switching is possible by using a USB HUB on the secondary side) - USB host connector which is standard Type B female and have to be connected to a PC or other USB host device
- USB target connector which is standard Type A female and have to be connected to a USB peripheral device
- Built-in FG terminal and SG/FG separation function by the dip-switch each USB host and USB target
- FG separation function by the dip-switch between USB host and USB target
- OS-Independent (No drivers required)
- USB-03G1 is powered through a USB port (Bus-powered) or an AC adapter (Self-powered)
DC-DC converter supply isolated voltage to a USB peripheral device from a USB host if no external power supply is present - 4000VDC bus isolation
- ESD and surge protection
- Built-in common mode filter for radiation noises
- Housing material: Plastic
- DIN rail, magnet, and screw mountable(Attachment is required)
- Includes a USB3.0 A-B cable 200 [mm]
- Includes an AC adapter
- Non-use of 10 Restricted substances of RoHS directive
- MADE IN JAPAN
Specification
Item | Description | Remarks |
---|---|---|
Model | USB-03G1 | |
Input Power | 5VDC Supplied through a USB port (Bus-powered) or AC adapter(Self-powered) |
Recommend the use of an AC adapter for stably supply An AC adapter supply to the host side. |
Current Consumption | Less than 100mA + current of the target device | MAX Sum: 900mA |
HOST Interface | USB 3.0/3.1 Gen1 Supports Super (5Gbps) USB 2.0 Full (12Mbps) and Low (1.5Mbps) Speed |
USB 1.1 compatible ESD protection |
Isolation Protection | 4000VDC | Designed value |
Support OS | OS-Independent (No drivers required) | |
LED | PWR: Power LED TG-PWR: Target power LED |
|
Operating Ambient Temperature | -20 to 60℃ ( -4 to 140 [°F] ) | No condensation permitted |
Operating Ambient Humidity | 30 to 85%RH | No condensation permitted |
Storage Ambient Temperature | -20 to 60℃ ( -4 to 140 [°F] ) | No condensation permitted |
Storage Ambient Humidity | 30 to 85%RH | No condensation permitted |
Noise Tolerance | Not defined | |
Transmission and other Standard | Not defined | |
Weight | Approx. 90 [g] | Only main body |
Dimensions | 67 x 67 x 28 [mm] (2.638" x 2.638" x 1.102") |
Without projections |
Package Contents
- USB-03G1
- USB3.0 A-B cable 200 [mm]
- AC adapter (DC5V)
Documentation
Price and Optional Accessories
Description | MODEL | Image | List Price (JPY) | Stock Status |
---|---|---|---|---|
USB3.0/3.1 Gen1 Isolator | USB-03G1 | |||
Attachment with clamping screw | PEN-003 | |||
Attachment for 35mm DIN rail |
PEN-003-DIN | |||
Attachment with neodymium magnet |
PEN-003-MG |
Ordering
[USB-029H2-RP] High Speed(480Mbps) USB2.0 Isolator with Repeater IC HuMANDATA LTD.
[USB-029H2-RP] High Speed (480Mbps) USB2.0 Isolator with Repeater IC
Improved reliability is protected from the noise
by an isolated USB connection. High Speed (480Mbps) compliant
Overview
USB-029H2-RP is a USB 2.0 High Speed (480Mbps), Full Speed (12Mbps) and Low Speed (1.5Mbps) compliant isolator which isolates between a USB host and a USB peripheral device with 3000VDC. With USB-029H2-RP, it can be expected to eliminate ground loops that can cause measurement errors and equipment from surges, common-mode voltage, static discharge, magnetic fields, and radio frequency interference.There is no need to install any drivers. It works with every operating system such as Windows, Linux, Mac OS X. USB-029H2-RP uses the repeater ICs each USB host and USB target to exhibit the best output jitter performance USB 2.0 data lines. Also there is FG separation function by the dip-switch between USB host and USB target.
* Second and subsequent images are CG models
Features
- USB 2.0 High Speed (480Mbps), Full Speed (12Mbps) and Low Speed (1.5Mbps) compliant
- USB host connector which is standard Type B female and have to be connected to a PC or other USB host device
- USB target connector which is standard Type A female and have to be connected to a USB peripheral device
- Uses standard high-retention USB Type A/B cable connection
- Built-in FG terminal and SG/FG separation function by the dip-switch each USB host and USB target
- FG separation function by the dip-switch between USB host and USB target
- OS-Independent (No drivers required)
- Built-in repeater IC to exhibit the best output jitter performance USB 2.0 data lines with each USB host and USB target
-
USB-029H2-RP is powered through a USB port (Bus-powered) or an AC adapter (Self-powered)
DC-DC converter supply isolated voltage to a USB peripheral device from a USB host if no external power supply is present - 3000VDC bus isolation
- ESD and surge protection
- Housing material: Plastic
- DIN rail, magnet, and screw mountable(Attachment is required)
- Includes a USB cable (1.8m)
- Includes an AC adapter
- Non-use of 10 Restricted substances of RoHS directive
- MADE IN JAPAN
Specification
Item | Description | Remarks |
---|---|---|
Model | USB-029H2-RP | |
Input Power |
5VDC Supplied through a USB port(Bus-powered) or AC adapter(Self-powered) |
Recommend the use of an AC adapter for stably supply An AC adapter supply to the host side. |
Supplied Current to Target |
Less than 100 mA(Bus-powered) Less than 400 mA(AC adapter) |
|
HOST Interface |
USB 2.0 Compliant Supports High (480Mbps), Full (12Mbps) and Low (1.5Mbps) Speed |
USB 1.1 compatible ESD protection |
Isolation Method | Bus isolation | |
Isolation Protection | 3000VDC | Designed value |
Support OS | OS-Independent (No drivers required) | |
LED |
PWR: Power LED TG-PWR: Target power LED |
|
Operating Ambient Temperature | -10 to 60℃ (14 to 140 [°F]) | No condensation permitted |
Operating Ambient Humidity | 30 to 85%RH | No condensation permitted |
Storage Ambient Temperature | -20 to 60℃ (-4 to 140 [°F]) | No condensation permitted |
Storage Ambient Humidity | 30 to 85%RH | No condensation permitted |
Noise Tolerance | Not defined | |
Transmission and other Standard | Not defined | |
Weight | Approx. 90 [g] | Only main body |
Dimensions |
67 x 67 x 28 [mm] (2.638" x 2.638" x 1.102") |
Without projections |
Package Contents
- USB-029H2-RP
- USB A-B cable 1.8m
- AC adapter
Documentation
Price and Optional Accessories
Description | MODEL | Image | List Price (JPY) | Stock Status |
---|---|---|---|---|
USB2.0 Isolator with Repeater IC | USB-029H2-RP | |||
Attachment with clamping screw | PEN-003 | |||
Attachment for 35mm DIN rail |
PEN-003-DIN | |||
Attachment with neodymium magnet |
PEN-003-MG |
Ordering
[USB-043] USB Isolator Board HuMANDATA LTD.
[USB-043] USB Isolator Board
Improved reliability is protected from the noise
by an isolated USB connection.
Overview
USB-043 is a USB 2.0 Full Speed(12Mbps) and Low Speed(1.5Mbps) compliant isorator which isolates between a USB host and a USB peripheral device with 2500VDC. USB-043 can be used to built-in to the device for the board type. With USB-043, it can be expected to eliminate ground loops that can cause measurement errors and equipment from surges, common-mode voltage, static discharge, magnetic fields, and radio frequency interference.There is no need to install any drivers. It works with every operating system such as Windows, Linux, Mac OS X.
Features
- USB host connector which is standard Type B female and have to be connected to a PC or other USB host device
- USB target connector which is standard Type A female and have to be connected to a USB peripheral device
- Uses standard high-retention USB Type A/B cable connection
- USB 2.0 Full Speed (12Mbps) and Low Speed (1.5Mbps) Speed compliant
- OS-Independent (No drivers required)
-
USB-043 is powered through a USB port (Bus-powered)
DC-DC converter supply isolated voltage to a USB peripheral device from a USB host if no external power supply is present - 2500VDC bus isolation
- ESD and surge protection
- Includes a USB cable (1.8m)
- Non-use of 10 Restricted substances of RoHS directive
- MADE IN JAPAN
Specification
Item | Description | Remarks |
---|---|---|
Model | USB-043 | |
Input Power |
5VDC Supplied through a USB port(Bus-powered) |
No external power supply required |
Current Consumption | Less than 100 mA + current of the target device |
Target device : 400mA max. (Lower than the supply capacity of the host side) |
HOST Interface |
USB 2.0 Compliant (Supports Full and Low Speed) |
USB 1.1 compatible Hi Speed is not supported. ESD protection |
Isolation Method | Bus isolation | |
Isolation Protection | 2500VDC | Designed value |
Support OS | OS-Independent (No drivers required) | |
LED | POW :Power LED | |
USB Connector(Host) | Standard Type B Female | High-retention connector |
USB Connector(Target) | Standard Type A Female | High-retention connector |
Operating Ambient Temperature | -20 to 60℃ (-4 to 140 [°F]) | No condensation permitted |
Operating Ambient Humidity | 30 to 85%RH | No condensation permitted |
Storage Ambient Temperature | -20 to 60℃ (-4 to 140 [°F]) | No condensation permitted |
Storage Ambient Humidity | 30 to 85%RH | No condensation permitted |
Noise Tolerance | Not defined | |
Transmission and other Standard | Not defined | |
Dimensions |
63 x 40[mm] (2.480" x 1.575") |
Without projections |
Weight | Approx. 20 [g] | Only main body |
Package Contents
- USB-043
- USB A-B cable 1.8m
Documentation
Price and Optional Accessories
Description | MODEL | Image | List Price (JPY) | Stock Status |
---|---|---|---|---|
USB Isolator Board | USB-043 | |||
Attachment A for panel mount | ACC-024 |
Ordering
[USB-029H] USB Isolator Industrial-Grade HuMANDATA LTD.
[USB-029H] USB Isolator Industrial-Grade
Improved reliability is protected from the noise
by an isolated USB connection. Reliable Industrial-Grade design
Overview
USB-029H is a USB 2.0 Full Speed (12Mbps) and Low Speed (1.5Mbps) compliant isolator which isolates between a USB host and a USB peripheral device with 2500VDC. With USB-029H, it can be expected to eliminate ground loops that can cause measurement errors and equipment from surges, common-mode voltage, static discharge, magnetic fields, and radio frequency interference.There is no need to install any drivers. It works with every operating system such as Windows, Linux, Mac OS X.
USB-029H is a industry-grade product that add the FG terminal and FG/SG separation function by the dip-switch from USB-029.
* Second and subsequent images are CG models
Features
- USB host connector which is standard Type B female and have to be connected to a PC or other USB host device
- USB target connector which is standard Type A female and have to be connected to a USB peripheral device
- Uses standard high-retention USB Type A/B cable connection
- Built-in FG terminal and SG/FG separation function by the dip-switch each USB host and USB target
- USB 2.0 Full Speed (12Mbps) and Low Speed (1.5Mbps) compliant
- OS-Independent (No drivers required)
-
USB-029H is powered through a USB port (Bus-powered) or an AC adapter (Self-powered)
DC-DC converter supply isolated voltage to a USB peripheral device from a USB host if no external power supply is present - 2500VDC bus isolation
- ESD and surge protection
- Housing material: Plastic
- DIN rail, magnet, and screw mountable (Attachment is required)
- Includes a USB cable (1.8m)
- Includes an AC adapter
- Non-use of 10 Restricted substances of RoHS directive
- MADE IN JAPAN
Specification
Item | Description | Remarks |
---|---|---|
Model | USB-029H | |
Input Power |
5VDC Supplied through a USB port (Bus-powered) or AC adapter (Self-powered) |
Recommend the use of an AC adapter for stably supply An AC adapter supply to the host side. |
Current Consumption | Less than 100 mA + current of the target device |
Target device : 400mA max. (Lower than the supply capacity of the host side) |
HOST Interface |
USB 2.0 Compliant (Supports Full and Low Speed) |
USB 1.1 compatible Hi Speed is not supported. ESD protection |
Isolation Method | Bus isolation | |
Isolation Protection | 2500VDC | Designed value |
Support OS | OS-Independent (No drivers required) | |
LED |
POW: Power LED TG-POW: Target Power LED |
|
Operating Ambient Temperature | -10 to 60℃ (14 to 140 [°F]) | No condensation permitted |
Operating Ambient Humidity | 30 to 85%RH | No condensation permitted |
Storage Ambient Temperature | -10 to 60℃ (14 to 140 [°F]) | No condensation permitted |
Storage Ambient Humidity | 30 to 85%RH | No condensation permitted |
Noise Tolerance | Not defined | |
Transmission and other Standard | Not defined | |
Weight | Approx. 90 [g] | Only main body |
Dimensions |
67 x 67 x 28 [mm] (2.638" x 2.638" x 1.102") |
Without projections |
Package Contents
- USB-029H
- USB A-B cable 1.8m
- AC adapter
Documentation
Price and Optional Accessories
Description | MODEL | Image | List Price (JPY) | Stock Status |
---|---|---|---|---|
USB Isolator Industrial-Grade | USB-029H | |||
Attachment with clamping screw | PEN-003 | |||
Attachment for 35mm DIN rail |
PEN-003-DIN | |||
Attachment with neodymium magnet |
PEN-003-MG |
Ordering